|
|
 |
|||||
|
|
||||||
 |
||||
| I-10/I-20 Ultra MODELS I-10 – Shrub I-20 – 4" Pop-up (10 cm) I-20-6P – 6" Pop-up (15 cm) I-20-HP – 12" Pop-up (30 cm) DIMENSIONS • Overall height: I-10 – 7 3/4" (20 cm) I-20 – 7 3/8" (19 cm) I-20-6P – 9 7/8" (25 cm) I-20-HP – 17" (43 cm) • 3/4 " female inlet NPT • Exposed diameter: 1 3/4" (4 cm) OPERATING SPECIFICATIONS • Discharge rate: .9 to 14.3 gpm (0.20 to 1.86 m3/hr; 3.4 to 31.0 l/min) • Radius: 17' to 47' (5.2 to 14.3 m) • Recommended pressure range: 40 to 60 psi (2.8 to 4.1 bars; 275 to 413 kPa) • Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa) • Precipitation rates:approximately .4" (10 mm) per hour at 50 psi (3.4 bars; 344 kPa) for spacing from 18' to 45' (7.6 to 13.7 m) • Nozzle trajectory: standard – 25°; low-angle – 13° • Drain check valve for up to 10' (3.0 m) elevation change Note: To ensure optimum nozzle performance, the rotor should be operated in the "Recommended pressure range." The sprinkler will work normally when used in the "Operating pressure range", but nozzle performance may be reduced. OPTIONS AVAILABLE • Reclaimed water cover • Stainless steel riser (4" & 6" I-20 only) • Factory-installed nozzles (Standard and LA only)
ADJ = Adjustable Arc without Check Valve 360 = Full-Circle without Check Valve ADV = Adjustable Arc with Check Valve 36V = Full-Circle with Check Valve ADS = Adjustable Arc, Stainless Steel Riser, with Check Valve 36S = Full-Circle, Stainless Steel Riser, with Check Valve ARV = Adjustable Arc, Reclaimed Water, with Check Valve 3RV = Full-Circle, Reclaimed Water, with Check Valve ARS = Adjustable Arc, Reclaimed Water, Stainless Steel Riser, with Check Valve 3RS = Full-Circle, Reclaimed Water, Stainless Steel Riser, with Check Valve |
 |
|||||||||||||||||||
 |
||||