FAQ: Program Interval Days

Q: How do I program Interval Days on my XC, EC, Pro-C, or ICC Controller?

A: The XC, EC, Pro-C and ICC controllers come with the Interval Watering feature. This feature is built into the Set Days To Water or Water Days function of the controller.

Interval Watering is a feature that allows you to select the number of days to pass before the next watering day. For example, an interval of 3 will cycle the program once every three days and water on the third day. An interval of 1 is every day and an interval of 2 will water every other day. An interval can be set for any time period up to 31 days.

Click on the following link to see instructions on how to set the Interval Day.

1. EC
2. Pro-C
3. ICC
4. XC

The Pro-C and ICC will also let you set a Days Left feature. By setting the Days Left, you can program the controller to wait a specified number of days before starting the Interval Watering. After the first water day, the Days Left displays as a count down showing how many days remain until the next water day. The EC controller does not have this feature.

Programming the Interval feature is different on the three different controllers. Refer to your owner’s manual for specific programming instructions or click on the link below to view an owner’s manual on line.