Clearing the controller’s Memory / Resetting the Controller

If you feel you have incorrectly programmed the controller, there is a reset process that will reset the memory to factory defaults and erase all programs and data that has been entered into the controller. The reset is also helpful in clearing possible glitches that may occur from electrical power surges.

Start by removing the battery and turning the dial to the RUN position.

1. Press and hold down the , and buttons.
2. Press and release the reset button in the lower wiring compartment.
3. Release the , and buttons. The display should now show 12:00AM. All the memory has been cleared and the controller may now be reprogrammed.