Pedestal Mounting the Controller (ICC-800M / ICC-800SS)

Pedestal Mount, Metal or Stainless Steel Cabinet

1. Set concrete forms using the installation instructions provided with the controller. Allow at least 6" of conduit above the surface of the concrete pad.
2. Assemble the mounting template. Locate the bolts two inches deep in the concrete pad, in the locations indicated. The pad can be any size but at least a two-foot square is recommended.
3. Level the mounting bolts before the concrete sets.
4. After the concrete sets, remove the door of the pedestal and slide the pedestal down onto the four bolts. Secure the pedestal to the bolts using the enclosed washers and nuts.