Changing the Run Time

You have the ability to adjust the amount of time that a station will run once it has been turned on by your ICR. This does not affect the run time programmed into your controller. This adjustment is made at the transmitter as described below.

To change the Run Time:

1. If the unit is OFF (no display), power the transmitter by pressing any of the buttons for at least 1 second then releasing the button. The transmitter will illuminate and display the active station.
2. Press the Mode button until the words “Run Time” along with the current Run Time is displayed. (default is 10 minutes) The Run Time will be blinking at this point. If more than 5 seconds go by without a button being pressed, the Transmitter will revert back to displaying the active station.
3. Use the or buttons to change the Run Time to any of the 8 settings ranging from 1 to 30 minutes. Then do not touch any of the buttons for 5 seconds and the display will stop blinking and return back to the active station.