Pro-C Components

This section will give you a brief overview of some of the components on the Pro-C. Each item will be discussed in further detail later, however this section can be helpful in getting acquainted with the controller.

A. – LCD Display

  1. Program Selector – Identifies the program in use A, B, or C.
  2. Station Number – Identifies currently selected station number.
  3. Main Display – Indicates various times, values, and programmed information.
  4. Year – Identifies current calendar year.
  5. Month – Identifies current calendar month.
  6. Day – Identifies current calendar day.
  7. Running – Sprinkler icon indicates when watering is occurring.
  8. Days of the week – Identifies days of the week to water or not water. You can also select odd or even and an interval watering schedule.
  9. Odd/Even Watering – Identifies if odd or even watering is selected.
  10. Interval – Identifies if interval watering has been selected.
  11. Seasonal Adjust – Displays in increments of 10%, the percentage of seasonal adjust that has been selected.
  12. Start Time – Identifies selected start time. (Only appears on LCD main display when “Set Watering Start Times” is selected.)

B. – Control Buttons and Switches

  1. Button – Increases the selected flashing display.
  2. Button – Decreases the selected flashing display.
  3. Button – Returns selected flashing display to the previous item.
  4. Button – Advances the selected flashing display to the next item. Also to start a manual cycle.
  5. Button – Selects programs A, B, and C. Also to start a test program.
  6. Rain Sensor Switch – Allows user to bypass weather sensor, if one is installed.
  7. and Buttons – Used to increase or decrease the seasonal adjust option.

A key feature of the Pro-C is its clear, easy-to-use dial design that makes programming a snap. All essential keypad functions are clearly marked to eliminate the confusion that’s a characteristic of so many other controllers.

C. – Control Dial

  • Run – Normal dial position for automatic and manual operation.
  • Set Current Date/Time – Allows current date and clock time to be set.
  • Set Watering Start Times – Allows 1 to 4 start times to be enabled in each program.
  • Set Station Run Times – Allows user to set each station run time.
  • Set Days to Water – Allows user to select individual days to water or to select an odd, even, or interval watering schedule.
  • Set Pump Operation – Allows user to turn off pump or master valve for specific stations.
  • Manual – Single Station – Allows user to activate a one time watering of a single station.
  • Manual – All Stations – Allows user to activate a one time watering of all stations or a few selected stations in a selected program.
  • System Off – Allows user to discontinue all programs and stop all watering until the dial is returned to the RUN position, or to set the programmable rain off feature.