Setting Station Run Times (Length of Watering for Each Area)

  1. Turn the dial to the SET STATION RUN TIMES position.
  2. The display will show the last program selected (A, B, or C) the station number selected, and the run time for that station will be flashing. You can switch to another program by pressing the button.
  3. Use the and buttons to change the station run time on the display.
  4. Press the button to advance to the next station.
  5. Repeat steps 3 and 4 for each station.
  6. You may set station run times from 1 minute to 6 hours.
  7. You can move between programs while staying on the same station. However, it is recommended that one program is completed before going on to the next program. Jumping between programs can be confusing and may result in program errors.