Manually Run All Stations

  1. Turn the dial to MANUAL-ALL STATIONS.
  2. You can select program A, B, or C by pressing the button.
  3. Press the button until desired starting station is displayed.
  4. Station run time will flash in the display. Use the and buttons to select the amount of run time for the station to water if different from the run time displayed.
  5. Use the button to move to the next station.
  6. Repeat steps 3 and 4 to customize each station if desired.
  7. Press the button until desired starting station is displayed.
  8. Return the dial to RUN (custom program will water the entire program beginning with the station number last left in the display, then controller will return to automatic mode with no change in the previously set program).

NOTE: The station that is on the display when you turn the dial to RUN, will be the first station to run. The controller will then proceed to water in sequential order only. It will not water previous stations.