ICC: Set Station Run Times

The ICC supports run times from 0-2 hours for stations assigned to programs A, B, or C and 0-12 hours for stations assigned to program D (typically the drip program). You can also use a Water Budget setting on the ICC controller.

1. To set a run time, move the cursor to the arrow buttons next to the time, and hold down the left mouse button to dial up or down.
   
   Water Budget: With the ICC controller, you can use this setting to adjust your overall watering amount by season without adjusting run times individually. The water budget can be set from 10% to 150% in 10% increments. For example, in the rainy season, you can reduce watering by half by setting water budget to 50 percent. Every run time automatically will be reduced by half. Likewise, run times can be increased up to 50 percent during dry periods.
   
   However, bear in mind that water budgeting won’t increase beyond two hours for programs A, B, and C, or 12 hours for program D. Note: Even with water budgeting, you cannot increase your run times beyond the maximum allowable for the controller.
   
   It is recommended that water budget be set a 100% for the downloaded program and then used on the controller to adjust for minor weather changes.
   
   
2. When you're done, choose OK to save the watering schedule you’ve selected.

You can return at any time and change any of the run times you’ve set. To change the run times at a later time choose Setup, then Station Run Times (or press Alt-S-R).