A universal mounting clip and mounting adapter are also provided with the SVC. These allow for alternate methods of mounting the controller either to the side of the valve box or stake mounted within the valve box.
Valve Box Mounting Method (Figure 2)
- Position the universal mounting adapter on the side of the valve box. Make sure that the bracket is positioned so that the controller will not interfere with the top of the valve box cover.
- Drive two screws to secure the adapter to the side of the valve box.
- Attach the SVC to the mounting clip and slide it on the end of the mounting adapter.
Stake Mounting Method (Figure 3)
The universal mounting adapter can also be used to stake mount the SVC.
- Cut a section of 1/2" diameter plastic pipe.
- Drive the pipe into the ground inside the valve box to the desired height of the controller.
- Slip the mounting adapter on top of the pipe.
- Attached the SVC to the mounting clip and slide onto the adapter.
