Connecting a Weather Sensor

A Hunter Mini-Clik® rain sensor or other micro-switch type weather sensor can be connected to the SVC. The purpose of this sensor is to stop watering when weather conditions dictate.

NOTE: When the Rain Sensor is interrupting the watering,the display will show the System Off icon , “OFF” and on the display.

To connect a weather sensor to the SVC:

  1. Cut the yellow wire loop attached to the SVC at approximately the middle of the loop.
  2. Remove approximately 1/2" (13mm) of insulation from each wire. Attach each wire to each of the wires of the weather sensor.
  3. Secure wire connections with waterproof connectors.