Mounting the WVC to a Hunter Valve

The WVC can easily be mounted on any Hunter plastic valve. A special designed valve mounting clip makes installation a snap.

NOTE: When mounting the WVC, position the antenna vertical and as high as possible in the valve box to achieve maximum range for radio communication.

To Mount the WVC to a Valve (Figure 2):

1. Unscrew the existing solenoid from the valve.
2. Screw the WVC latching solenoid into the valve bonnet.
3. Attach the large end of the valve mounting clip to the middle of the WVC body (mounting clip supplied with your WVC).
4. Snap the small end of the valve mounting clip to the solenoid.

NOTE: The total length of wire from the WVC to the solenoid should not exceed 100 ft.