Transmitting Programs

Once the WVC 3-digit identification code is entered into the WVP:

1. Use the button to select the transmit function. (The arrow will be flashing).
2. Squeeze and hold the Transmit/Receive button on the handle of the WVP for 2 seconds. The WVP will beep twice indicating that communication is taking place.
3. After a few seconds, dashed lines will appear on the display indicating that radio communication is being made with the WVC. When the last dashed line illuminates, data transmission is completed and the WVP will beep twice indicating that data transmission was successful.

If for any reason if radio connect was not successful, the WVP will produce a single two second beep and the No Contact icon will be displayed in the middle of the display for a brief period.

If you are experiencing problems contacting the WVC, make sure you are using the correct identification code. If communication problems persist, try moving closer to the WVC to improve radio contact. The range of the signal will be up to 100 ft. with the WVC installed in the valve box. Actual performance varies depending upon the installation and the surrounding terrain.