| PROBLEM |
CAUSES |
SOLUTIONS |
| No display on WVP. |
Display is off.
Battery is dead.
|
Press any button for 1 second.
Replace battery.
|
|
Automatic irrigation does not start at start time.
|
Controller in System Off mode.
|
Re-enable watering.
|
| AM/PM of time of day not set correctly. |
Correct AM/PM of time of day. |
| AM/PM of start time not set correctly. |
Correct AM/PM of start time. |
| Faulty wire connection(s) at solenoid. |
Recheck wiring to solenoid. |
| Rain sensor does not suspend watering. |
Rain sensor defective or miswired. |
Verify proper operation of the rain sensor and wire connections. |
| Controller waters more than one time. |
Too many start times have been entered. |
Recheck start times. |
| No contact icon is displayed when transmitting or receiving data. |
Wrong 3-digit WVC identification code entered. |
Reenter correct identification code in WVP. (Reference WVC owner’s manual for establishing WVC I.D. )
|
| Out of range. |
Move closer to WVC and attempt to establish contact. |
| Battery dead in WVC. |
Replace WVC battery. |