Manually Run All Stations

  1. Turn dial to MANUAL – ALL STATIONS position.
  2. Select program A, B, or C by pressing the Program Button button.
  3. Station run time will flash in the display. Use the Plus Button or Minus Button button to select the amount of time for a station to water if different from the run time displayed.
  4. Use the Right Arrow Button button to move to the next station.
  5. Repeat steps 3 and 4 to customize each station.
  6. Press the Right Arrow Button button until you reach the station at which you would like watering to begin.

Turn the dial clockwise to the RUN position (the controller will water the entire program beginning with the station number last left in the display, then return to the automatic mode with no change in the previously set program).

 XC Dial - Manually Run All Stations