Flow-Clik Instructions Index

1.	Introduction
2.	Flow-Clik Components
	•	Flow-Clik Sensors
	•	Flow-Clik Sensor Body (FCT Series)
	•	Flow-Clik Interface Box
	•	Flow-Clik Status Indicator
3.	System Overview and Flow-Clik Operation
	•	Example of System Operation
	•	High Flow Scenario 1: Valve 3 Lateral Line Breaks
	•	High Flow Scenario 2: Mainline Ruptures
4.	Installing the Flow-Clik Sensor Body
5.	Installing the Flow-Clik Sensor into Sensor Body
6.	Mounting the Flow-Clik Interface Box
7.	Wiring the Flow-Clik to the Irrigation System
	•	Wiring the Sensor to the Interface Box
	•	Wiring the Interface Box to the Controller
	•	Pro-C and ICC Controller Installations
	•	SRC Controller Installations
	•	Other Controllers
8.	Wiring When Using Multiple Sensors
9.	System Considerations
10.	Calibrating the Flow-Clik to the Irrigation System
	•	Known Highest Flow Calibration Method
	•	Flow Estimate Calibration Method
	•	Manual Cycle Method
11.	Setting the Startup Delay
12.	Setting the Interupt Period
13.	Troubleshooting Guide
14.	Frequently Asked Questions
15.	Specifications