Flow-Clik Components

This section will give you a brief overview of some of the components of the Flow-Clik system. Each item will be discussed in further detail later, however, this section can be helpful in getting acquainted with the different options available.

A. Flow-Clik Sensor

1. Impeller – rotates when flow is occurring
2. O-rings – provides sealing of sensor in sensor body
3. Wires – black and red wires connect sensor to FlowClik Interface Box

B. Flow-Clik Sensor Body (FCT Series)

1. Flow-Clik Tee – the Tee is installed into the irrigation system and houses the FlowClik sensor
2. Plug – used to seal the body when the sensor is not installed in the sensor body
3. O-rings – provides sealing of plug in sensor body
4. Cap – retains plug or sensor in sensor body
5. Cover – snaps over the top of the sensor

Note: Flow-Clik sensor bodies ordered separately.