XC Hybrid Support

Download the XC Hybrid Owner's Manual for detailed instructions on installation and programming the XC Hybrid irrigation controller.  

Turn the dial to the START TIMES position.The factory preset is set on program A. If necessary, you can select program B, or C by pressing the PRG button.Use the or button to

A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the

Solar power eliminates the need for batteries and provides maintenance-free operation by harnessing the sun's energy or ambient light to fully power the controller 24 hours a day,

Battery Life From a battery life standpoint, the answer is not as easy as saying "the batteries will last for two years". The answer really depends upon the number of actuations

The XC Hybrid operates on six AA alkaline batteries (see fig. 1), and the XC Hybrid Stainless uses six C batteries (see fig. 2). A battery carrier is supplied with your controller.

 The Hunter Node and WVC battery powered controllers can have the valve installed a maximum of 100 feet away. XC Hybrid Wire Sizing ChartBelow is a chart indicating maximum wire

We would prefer that you use a Hunter valve with a Hunter DC latching solenoid, but we realize that sometimes you may be retrofitting existing systems that have another