Pilot Central Control software simplifies management of your irrigation system with a wide range of advanced features. It safely balances sprinkler demand with water and electrical supply for the most efficient irrigation cycles possible.
When controlling where and when water is applied becomes more important than efficient use of the pump stations (grow-in, overseeding) Pilot controller programs are the perfect solution. Create them from the central, edit them at the controller, then update the central with the new settings.
Operating system: Windows 8, 32 or 64-bit
Maximum system programs: Unlimited
Maximum field controllers: 999
Maximum stations: 79,920
ET-based scheduling: Weather station or manually entered
Hydraulic management: Automated and graphed to individual stations
Mapping: CAD, aerial photo, user-drawn, or all three
Stored historical reports
Pilot uses your electrical and hydraulic data to efficiently balance sprinkler demand while maintaining flow at safe velocities. To protect your pump station and maintain optimal sprinkler uniformity, irrigation can be gradually stepped up in safe increments.
With Pilot, critical irrigation is not dependent upon the whims and availability of a computer or communications link where it is subject to a single point of failure. Pilot software creates schedules then sends them to the field where controllers do the actual irrigating. Because Pilot field controllers are packed with intelligence, you can even create and edit schedules out on the course and transfer them back to Pilot for review and editing.
Use your own map image, find one online, or both. Although it is not required to have a map, adding one allows you to run spinklers by clicking and monitor stations as they are running.