Manual Run – All Stations
Manual All Stations allows the operation of valves assigned to a program in sequential order.
1. Press and hold the button for three seconds. The will be displayed, along with the program letter. A station number will also be displayed.
2. Select program by pressing the button.
3. Use the or buttons to select the amount of time for the station to water if different from the run time displayed.
4. Use the button to move to the next station.
5. Repeat steps 3 and 4 until you reach the station at which you want watering to begin.
After 2 seconds of inactivity, manual watering will begin a sequence through each valve of the entire program. Once manual watering has been completed, the controller will automatically return to the automatic mode with no change in the previously set program.