FAQs, Installation Procedures
A complete watering schedule (Program) includes the following:
- Watering Start Time(s)
- Station Run Time(s)
- Water Days
On an active Water Day the controller will look for a Watering Start Time to start the cycle, then the controller will look for the station(s) with Station Run Times. The controller will then run the stations in order, from the lowest number to the highest, one at a time until all stations in the program have watered.
Each program requires only one start time to initiate a watering sequence of all the stations assigned to that program. Multiple start times may be used to facilitate more efficient watering if local conditions dictate.