Hunter Technical Support Document
How do I update the firmware on my ICD-HP handheld programmer?
Updating Firmware on an ICD-HP
2. The file will be sent in a "zip" format. This may require WinZip, 7Zip or similar utilities to extract the data. Save the file to your desktop, or any other easy to locate file locations.
3. Place the ICD-HP in Flash Mode.
4. Open the zip file on the computer, and double-click the "Setup.exe" file. This will start a small program in a black window. For instructions on How to Unzip a file with your software follow this Support Article Link.
"Unzipping a Hunter Download (needs link)"
The program will prompt you to connect the ICD-HP (if you have not already done so), and press Enter to continue.
The flash update process may take 2 or 3 minutes. Characters will appear in the computer window as the update continues. The progress bar on the ICD-HP will begin to advance.
Note: Do not disconnect the ICD-HP before the update is completed! Doing so may leave the ICD-HP in an unusable state.
5. When the update is complete, the ICD-HP display will return to the main menu. The software program will show, “Press any key to end this program”.
If the ICD-HP is already connected to the computer, turn the ICD-HP power OFF with the power button.
If you encounter difficulties not documented in these instructions, contact Hunter Technical Support by phone while you have the ICD-HP and the computer together.
What's New In This Release (V1.03.000)
Still not finding the answers?
Hunter Technical Support experts are available to answer your question(s) about Hunter products and their usage. Simply click on the contact button below to submit an email request.