Hunter Headlines

Filter

Headlines Categories - Products

Date: Wednesday, June 29, 2016

Hunter Industries was selected to showcase our revolutionary MP Rotator on Discovery Science Channel’s show, “Machines: How They Work.” The theme for this season’s episodes is focused on everyday items that have more technology than you would expect. The producers of the show were intrigued by how much technology exists inside these little water-saving devices,  which is especially relevant with the increased emphasis on resource conservation. After a two-hour discussion on the MP Rotator sprinkler, Hunter

Date: Tuesday, June 7, 2016

Introducing the New HC Wi-Fi Enabled Irrigation Controller Hunter Industries recently completed the joining of efforts with Hydrawise of Australia. Hydrawise is an internet-based irrigation optimization software solution with Wi-Fi controllers designed for the irrigation contractor. This acquisition marks a significant step by Hunter into the internet of things space for control, management and optimization of residential and commercial landscape irrigation. Many new and exciting products will evolve

Date: Thursday, May 12, 2016

Commercial-grade micro irrigation products for any application Hunter proudly announces the release of a complete system of micro irrigation products for any application. New to Hunter’s micro lineup are: PLD-LOC Fittings which fit ½" tubing/dripline between 16-18 mm Commercial-grade IH Risers (flexible PVC) Multi-Port Emitters for commercial PVC systems Mini Landscape Dripline ¼" Polyethylene and Vinyl tubing ½" Polyethylene tubing Rigid Risers Eco-Indicator shows when the drip system is

Date: Tuesday, January 12, 2016

Hunter Industries is proud to introduce the Pressure Regulated Body for the PGP-04 and I-20 rotors. The pressure-regulated bodies will take incoming pressures of 50-100 PSI and reduce them to 45 PSI. The Hunter PRB rotors allow the nozzles to operate at peak efficiency, saving up to 25 percent more water. Having the pressure regulator in the body allows it to remain in place and functional even if the original riser is removed and replaced for service. To learn more, click here. 

Date: Wednesday, September 30, 2015

Hunter re-introduces the Dual-1 and Dual-2 decoders in a slim-line design. Other enhancements include solid copper red-and-blue wire leads, for more positive connections to the two-wire path, and a slightly reduced standby current draw (2.8 -3 mA). There is no change to the Dual decoder operating system (firmware). The new design is completely backward-compatible with all existing Dual components, and may be mixed within the same system with the older models. The Dual-S surge arrester will not be

Date: Tuesday, August 11, 2015

The Clik-Delay is a simple, low-cost water-saving device that attaches to Hunter Mini-Clik and Rain Clik sensors and Hunter controllers to prevent watering for 48 hours after a rain event. Clik-Delay is compatible with most commonly available brands of clik-type rain sensors and irrigation controllers. It expands the capability of any irrigation controller by preventing unnecessary watering and complies with recent watering restrictions in the state of California. The Clik-Delay battery has a 5-10 year

Date: Thursday, June 11, 2015

The Hunter X-Core and Pro-C irrigation controllers are two of Hunter’s most popular controllers for residential customers worldwide. Many homeowners with these controllers live in areas where water restrictions are being imposed. These videos show how to make adjustments to the X-Core and Pro-C controllers in order to comply with the restrictions.     How to Adjust a Hunter Pro-C to comply with water restrictions Step-by-step instructions show you how to easily change the watering days, start times, and

Date: Monday, January 26, 2015

Hunter Industries proudly announces the release of the new STK-6V, an enhanced version of its existing synthetic turf irrigation system to clean and cool synthetic sports turf. “The STK-6V was designed specifically to provide easier installation, simple maintenance, and to accommodate different types of playing surfaces,” said Rich Dunn, Hunter Product Manager. “The shorter vault design provides a connection to the mainline at approximately 24”-30” deep, a much more manageable depth for installation with

Date: Thursday, January 8, 2015

Hunter Industries is proud to introduce the MP800SR360, the newest addition to its MP Rotator short radius lineup. The MP800SR360 is designed for radius settings as low as 6 feet and up to 12 feet, with a 360º full-circle pattern. The precipitation rate remains matched across all arc and radius settings at approximately 0.8 inches per hour. It joins another model, the MP800SR90, with a 90º-120º adjustable arc, introduced earlier this year.This new addition to the MP Rotator family boasts all of the

Date: Friday, June 27, 2014

Hunter recently released a total of ten new videos to help users program the new battery operated Node controller.  Offered in one comprehensive video, as well as nine topic specific versions, these videos make it easy to view and share exactly the topics you are looking for.   To view videos on specific topics pertaining to the Node controller, click on the links below: 1. NODE: Introduction and buttons overview 2. NODE: Setting the date and time  3. NODE: Setting program start times  4. NODE: Setting

Pages

See Results
See Results