Date: Tuesday, January 12, 2016
Hunter Industries is proud to introduce the Pressure Regulated Body for the PGP-04 and I-20 rotors. The pressure-regulated bodies will take incoming pressures of 50-100 PSI and reduce them to 45 PSI. The Hunter PRB rotors allow the nozzles to operate at peak efficiency, saving up to 25 percent more water. Having the pressure regulator in the body allows it to remain in place and functional even if the original riser is removed and replaced for service. To learn more, click here.
Date: Wednesday, September 30, 2015
Hunter re-introduces the Dual-1 and Dual-2 decoders in a slim-line design. Other enhancements include solid copper red-and-blue wire leads, for more positive connections to the two-wire path, and a slightly reduced standby current draw (2.8 -3 mA).
There is no change to the Dual decoder operating system (firmware). The new design is completely backward-compatible with all existing Dual components, and may be mixed within the same system with the older models.
The Dual-S surge arrester will not be
Date: Tuesday, August 11, 2015
The Clik-Delay is a simple, low-cost water-saving device that attaches to Hunter Mini-Clik and Rain Clik sensors and Hunter controllers to prevent watering for 48 hours after a rain event. Clik-Delay is compatible with most commonly available brands of clik-type rain sensors and irrigation controllers. It expands the capability of any irrigation controller by preventing unnecessary watering and complies with recent watering restrictions in the state of California.
The Clik-Delay battery has a 5-10 year
Date: Thursday, June 11, 2015
The Hunter X-Core and Pro-C irrigation controllers are two of Hunter’s most popular controllers for residential customers worldwide. Many homeowners with these controllers live in areas where water restrictions are being imposed. These videos show how to make adjustments to the X-Core and Pro-C controllers in order to comply with the restrictions.
How to Adjust a Hunter Pro-C to comply with water restrictions
Step-by-step instructions show you how to easily change the watering days, start times, and
Date: Monday, January 26, 2015
Hunter Industries proudly announces the release of the new STK-6V, an enhanced version of its existing synthetic turf irrigation system to clean and cool synthetic sports turf. “The STK-6V was designed specifically to provide easier installation, simple maintenance, and to accommodate different types of playing surfaces,” said Rich Dunn, Hunter Product Manager. “The shorter vault design provides a connection to the mainline at approximately 24”-30” deep, a much more manageable depth for installation with
Date: Thursday, January 8, 2015
Hunter Industries is proud to introduce the MP800SR360, the newest addition to its MP Rotator short radius lineup. The MP800SR360 is designed for radius settings as low as 6 feet and up to 12 feet, with a 360º full-circle pattern. The precipitation rate remains matched across all arc and radius settings at approximately 0.8 inches per hour. It joins another model, the MP800SR90, with a 90º-120º adjustable arc, introduced earlier this year.This new addition to the MP Rotator family boasts all of the
Date: Friday, June 27, 2014
Hunter recently released a total of ten new videos to help users program the new battery operated Node controller. Offered in one comprehensive video, as well as nine topic specific versions, these videos make it easy to view and share exactly the topics you are looking for.
To view videos on specific topics pertaining to the Node controller, click on the links below:
1. NODE: Introduction and buttons overview
2. NODE: Setting the date and time
3. NODE: Setting program start times
4. NODE: Setting
Date: Wednesday, June 11, 2014
Hunter is proud to release the newest member to the water conserving Clik family of sensors for irrigation systems, the Soil-Clik. The Soil-Clik is a soil moisture sensing device that prevents water waste by limiting irrigation as the landscape reaches adequate moisture levels.
The Soil-Clik is compatible with all AC powered Hunter controllers and most major brands of irrigation controllers. The Soil-Clik has two components – a moisture sensor probe, which is placed in the soil up to 1,000 ft. from the
Date: Tuesday, April 15, 2014
A short radius version of the popular MP Rotator® product family, the MP800SR, is now available. This new MP Rotator extends the product line's ability to reach radius settings as low as 6 ft., while also reaching 12 ft. at the maximum radius setting.
The MP800SR was designed for short radius irrigation needs while retaining all of the features and benefits of the current MP Rotator line, including high distribution uniformity, wind-resistant streams, debris-resistant double-pop, and construction with the
Date: Tuesday, January 7, 2014
Hunter's new family of pressure-compensating drip emitters expands options for micro irrigation. Available in three convenient inlets: self-piercing barb, 10/32 thread, and 1/2" female thread. The barb and 10/32 thread models are offered in .5, 1, 2, 4, and 6 GPH models; the 1/2" female threaded model is available in 1 and 2 GPH.
This wide range of flow rates provides the individual plants and trees the optimal amount of water from a single emitter, regardless of pressure. Emitters are color-coded for