I-35

The I-35 Rotor has been replaced by the enhanced I-25 and I-40 Rotors

The strategic introduction of the feature-rich I-35 was aimed at bringing new innovations to our already very well respected I-Series Rotor line. Since introducing the I-35 we have upgraded the very popular I-25 and I-40 lines to have most of the same great new innovations. These include Auto Arc Return, Non-Strippable Drive and Non-Reversing Full Circle. The addition of these innovations to other models has essentially rendered the I-35 obsolete. If you are looking for a model similar to the I-35, we suggest the I-25 or the I-40 depending on the needs of your project.

Product Tabs

Specifications

Operating Specifications

Radius: 47' to 71'
Flow Rate: 7.7 to 31.5 GPM
Recommended pressure range: 40 to 100 PSI
Operating pressure range: 40 to 100 PSI
Precipitation rates: 0.4 in/hr approx.
Nozzle trajectory: 25 degrees

I-35 Nozzle Performance Data

I-35 Nozzle Rack I-35 Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
9 Lt. Brown	40	47	7.7	0.67	0.77
	50	49	8.3	0.67	0.77
	60	50	9.2	0.71	0.82
	70	51	9.9	0.73	0.85
12 Lt. Blue	50	53	11.2	0.77	0.89
	60	54	12.3	0.81	0.94
	70	55	13.3	0.85	0.98
	80	55	14.3	0.91	1.05
15 Gray	50	56	13.4	0.82	0.95
	60	57	14.3	0.85	0.98
	70	57	15.2	0.90	1.04
	80	58	16.4	0.94	1.08
18 Red	50	58	14.5	0.83	0.96
	60	59	15.7	0.87	1.00
	70	62	16.9	0.85	0.98
	80	63	18.2	0.88	1.02
21 Dk. Brown	60	62	17.8	0.89	1.03
	70	63	19.2	0.93	1.08
	80	64	20.5	0.96	1.11
	90	65	21.8	0.99	1.15
24 Dk. Green	60	64	21.9	1.03	1.19
	70	65	23.6	1.08	1.24
	80	66	25.6	1.13	1.31
	90	67	27.0	1.16	1.34
27 Dk. Blue	60	66	23.5	1.04	1.20
	70	68	25.5	1.06	1.23
	80	69	28.0	1.13	1.31
	90	70	29.5	1.16	1.34
30 Black	70	68	26.9	1.12	1.29
	80	70	28.7	1.13	1.30
	90	71	30.6	1.17	1.35
	100	71	31.5	1.20	1.39

I-35 High-Speed Nozzle Performance Data

I-35 Nozzle Rack I-35 High-Speed Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
9 Lt. Brown	40	42	7.7	0.84	0.97
	50	43	8.3	0.86	1.00
	60	44	9.2	0.91	1.06
	70	45	9.9	0.94	1.09
12 Lt. Blue	50	48	11.2	0.94	1.08
	60	49	12.3	0.99	1.14
	70	51	13.3	0.98	1.14
	80	51	14.3	1.06	1.22
15 Gray	50	49	13.4	1.07	1.24
	60	51	14.3	1.06	1.22
	70	53	15.2	1.04	1.20
	80	54	16.4	1.08	1.25
18 Red	50	50	14.5	1.12	1.29
	60	53	15.7	1.08	1.24
	70	55	16.9	1.08	1.24
	80	57	18.2	1.08	1.25
21 Dk. Brown	60	53	17.8	1.22	1.41
	70	56	19.2	1.18	1.36
	80	58	20.5	1.17	1.35
	90	59	21.8	1.21	1.39
24 Dk. Green	60	56	21.9	1.34	1.55
	70	58	23.6	1.35	1.56
	80	60	25.6	1.37	1.58
	90	61	27.0	1.40	1.61
27 Dk. Blue	60	58	23.5	1.34	1.55
	70	62	25.5	1.28	1.47
	80	64	28.0	1.32	1.52
	90	66	29.5	1.30	1.51
30 Black	70	60	26.9	1.44	1.66
	80	62	28.7	1.44	1.66
	90	65	30.6	1.39	1.61
	100	67	31.5	1.35	1.56

I-35 Low Pressure Nozzle Performance Data

I-35 Low Pressure Nozzle Rack I-35 Low Pressure Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
7LP Orange	40	45	7.5	0.71	0.82
	50	45	8.5	0.81	0.93
	60	46	9.5	0.86	1.00
10LP Lt. Green	40	50	10.1	0.78	0.90
	50	51	11.5	0.85	0.98
	60	53	12.8	0.88	1.01
13LP Lt. Blue	40	53	12.4	0.85	0.98
	50	54	14.0	0.92	1.07
	60	55	15.6	0.99	1.15
15LP Gray	40	55	14.7	0.94	1.08
	50	58	17.1	0.98	1.13
	60	60	18.5	0.99	1.14

I-35 DIMENSIONS CHART

	I-35-06
Overall Height	10-3/8"
Pop-up Height	6"
Exposed Diameter	1-7/8"
Inlet Size	1" Female NPT

Resources

Literature

[1]

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

I-35 Brochure [1]

[9]

USA

[9]

[8]

I-35 Low Pressure Nozzle Brochure [9]

[10]

USA

[10]

[8]

I-35 Product Spec Cut Sheet [10]

Manuals

[11]

USA

[11]

Español

[12]

Français

[13]

[8]

I-35 Installation Card [11]

Photos

[14]

USA

[14]

[8]

I-35 Photos [14]

Video

[15]

USA

[15]

[8]

Rotor Series: Adjusting my Rotors [15]

[16]

USA

[16]

[8]

Rotor Series: Cleaning a Filter on Rotor [16]

[17]

USA

[17]

[8]

Rotor Series: Installing a Nozzle on a Rotor [17]

[18]

USA

[18]

[8]

Rotor Series: Replacing Riser Seals on Rotors [18]

Support

Topic	Title [19]	Rating [20]
FAQs	Can I replace another brand's sprinkler with the Hunter brand? >> Read More [21]	3.55
Adjustment, FAQs	How do I adjust the arc on my Hunter rotor? >> Read More [22]	2.35
Adjustment, FAQs, Video	How do I adjust the radius or distance of throw on my Hunter rotor? >> Read More [23]	4
Adjustment, FAQs	How do I obtain a Hunter adjustment wrench? >> Read More [24]	3.5
Charts, Replacement Guides	Replacement Guide: I-35 Rotors >> Read More [25]	3
Installation Procedures, Video	Rotor Nozzle Installation Procedure >> Read More [26]	4.85
Installation Procedures	Staking Kit and Reclaimed Water Identification >> Read More [27]	4.25
FAQs, Troubleshooting, Video	What are some troubleshooting tips for a rotor that doesn't fully pop-up? >> Read More [28]	4.6
FAQs	What are the advantages of a stainless steel rotor over a plastic rotor? >> Read More [29]	3
FAQs	What is the purpose of the little hole that leaks water on the side of my rotor's stem? >> Read More [30]	4.3

View All Support Articles for This Product [31]

Rotors Comparison Chart (1")

	[32] I-25 [32]	[33] I-40 [33]	[33] I-40 ON [33]	[34] I-60 [34]
FEATURES
Inlet Size	1"	1"	1"	1"
Radius	37' - 71'	45' - 70'	52' - 76'	50' - 67'
Flow Rate (GPM)	3.8 - 31.5	7.0 - 28.2	13.0 - 33.7	6.5 - 20.8
Recommended Pressure Range (PSI)	40 - 100	40 - 100	40 - 100	40 - 60
Operating Pressure Range (PSI)	40 - 100	40 - 100	40 - 100	20 - 100
Precipitation Rate (in/hr)	0.4	0.4	0.4	0.4
Nozzle Trajectory	25º	25º	25º	25º
Check Valves	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed
Specialty Nozzles	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed
Check Height	10'	15'	15'	10'
Nozzle Options	12	6	5	6
Warranty	5 Years	5 Years	5 Years	5 Years
ADVANCED FEATURES
Automatic Arc Return
Non-Strippable Drive
Part and Full Cirlce in One Model
Reclaimed Water ID
Stainless Steel Riser	Optional
Precision Distribution Control™
Applications
Commercial/Municipal
Athletic Fields
High Vandalism Areas
Low Pressure Areas
Reclaimed Water

I-35

I-35

The I-35 Rotor has been replaced by the enhanced I-25 and I-40 Rotors

Product Tabs

I-35 Nozzle Performance Data

I-35 Nozzle Performance Data

9

12

15

18

21

24

27

30

I-35 High-Speed Nozzle Performance Data

I-35 High-Speed Nozzle Performance Data

9

12

15

18

21

24

27

30

I-35 Low Pressure Nozzle Performance Data

I-35 Low Pressure Nozzle Performance Data

7LP

10LP

13LP

15LP

I-35 DIMENSIONS CHART

Literature

Manuals

Photos

Video

View All Support Articles for This Product [31]

Rotors Comparison Chart (1")

I-35 High-Speed
Nozzle Performance Data

I-35 Low Pressure
Nozzle Performance Data