D-Series Decoders

The Benefits of local satellite control, with the low-cost simplicity of two-wire decoder control

Decoder installations continue to be one of the fastest growing forms of technology in irrigation control. A key advantage over conventional systems is that decoders use less wire than conventional systems. That in turn means lower cost, faster installation, simpler troubleshooting and easier repairs. Systems can be easily expanded with minimal digging and disruption of landscaping by adding in more decoders rather than running additional wires.

Surveyor [1]™ and AGC [2] enable you to take advantage of this cost-efficient approach with the two-wire decoder version of the controller. The D-series decoder is available in your choice of 1, 2, 4 and 6-station outputs making it possible to run each head on an entire green with a single decoder. In all, decoders let you operate up to 99 stations out to 3 miles (4½ km) from a single controller. You can even mix decoders with your conventional system so they are ideal for system retrofits.

Product Tabs

Features

Built-in surge suppression. No additional surge arrestors required
Color-coded wire connections
True independent station control
Instead of individual decoders try DIH rotors with the decoder built right into the sprinkler. Supplemental surge arrestors are required with DIH rotors
Program decoder addresses from the AGC controller or use the handheld decoder programmer to do it wirelessly out on the course
Two-way feedback to the controller with confirmation and status indication
Controller Stations: 99 decoder outputs with up to 2 Hunter VIH rotors per output for 198 heads per controller

Specifications

AGC Decoder Dimensions

	AGC Pedestal	AGC Wall Mount
Height	40"	12"
Width	22"	15½"
Depth	16"	6"

AGC Pedestal

AGC Wall Mount

Height

40"

12"

Width

22"

15½"

Depth

16"

Resources

Literature

[3]

USA

[3]

Metric

[4]

简体中文

[5]

[6]

Hunter Golf Catalog [3]

Photos

[7]

USA

[7]

[6]

Golf Photos [7]

Specifications

[8]

USA

[8]

[6]

Golf Controllers Installation Details (DWG) [8]

[9]

USA

[9]

[6]

Golf Controllers Installation Details (PDF) [9]

[10]

USA

[10]

[6]

Golf Controllers Written Specification [10]

Support

Topic	Title [11]	Rating [12]
No support documents found.

D-SERIES DECODERS WITH AGC CONTROLLERS

Independant control of up to 99 decoder station outputs. Because each station can run up to two Hunter VIH sprinklers, one AGC controller can manage up to 198 heads.

Extend control up to 3 miles (4½ km). with a single cable.

Sprinklers can be placed up to 150 feet (45 meters) from the decoder.

DIH Rotors
Hunter's exclusive DIH rotor minimizes valve boxes and offers easy decoder replacement without turning off the water.