Hunter emitters apply water slowly and directly at the plant to ensure every drop is put to efficient use. They are available in three convenient styles including self-piercing barb, 10⁄32 threaded, and ½" female thread. The barb and 10⁄32 thread models are available in 0.5, 1, 2, 4, and 6 GPH models and the ½" female threaded models are available in 1 and 2 GPH. This wide range of flow rates offers you the flexibility to give individual plants and trees the right amount of water from a single emitter. They are also color-coded for fast flow identification and feature coined edges for easy gripping during installation.
An optional diffuser cap is available to help gently distribute water at high GPH flow and to protect the emitter outlet from clogging. Manufactured by Hunter in the USA, these emitters offer the ability to enhance both water and operational efficiency in any micro-irrigation zone.
Slowly delivers water right to the plant
Available in three convenient styles
Pressure compensating from 20 to 50 PSI
Flow labeled in imperial and metric units
Assembled in the USA
Optional diffuser cap available
Barbed emitters can be inserted into to ½" and ¼" tubing without tools for fast installation
Models are color-coded by flow rate for fast identification.
Ribbed edges provide easy tool-free installation.
With flow rates ranging from 0.5 to 6 GPH, plants can get the right amount of water from a single emitter.
½" Female Thread
* For HE only (not HEB)
Example:HE-20 - T - 100 = 2.0 GPH Point Source Emitter with 10/32" thread in a bag of 100HEB-050 - 25 = 0.5 GPH Point Source Emitter with 1/2" female thread in a bag of 25
HE-DIFF = Diffuser Cap Qt 50
Gently distributes water at higher flows and
protects the emitter outlet from clogging.