Water small spaces more efficiently with a new series of MP Rotators designed for distances from 6' to 12'.
The SR series offers the benefits of multi-stream multi-trajectory (MSMT) technology in areas smaller than ever before possible. The new MP800SR provides wind-resistant streams, high distribution uniformity, double-pop nozzle protector, and extreme resilience to dirt and debris.
Realize water savings for tight spaces. The MP800SR delivers water at a low application rate of 0.8 in/hr, less than half that of traditional spray nozzles.
Provides coverage from 6' to 12'
Color-coded for easy identification
Double-pop feature keeps dirt and debris out of nozzle
Removable filter screen prevents large objects from clogging nozzle
Low precipitation rate yields higher efficiency
Wind-resistant multi-stream technology
Adjustable arc and radius
The MP Rotator® has the unique ability to control the amount of water flowing through the nozzle at various arc and radius settings, resulting in matched precipitation regardless of the nozzle setting.
The MP Rotator’s nozzle pops up from its protected position only after the riser is fully extended, providing superior defense against dirt and debris.
The various streams of the MP Rotator allow it to target all areas of the landscape evenly, yielding superior uniformity over traditional spray nozzles. Each stream targets specific areas to achieve higher efficiency and even coverage.
The standard MP Rotator line applies water at 0.4 in/hr, while the SR Series has a precipitation rate of 0.8 in/hr. Either choice will avoid runoff, saving water and preventing erosion.
A Nozzle for Every Occasion
From the water-saving MP Rotator, to standard sprays and side-stripped specialty nozzles, Hunter provides a solution you can trust for years on end.
Short Radius High Efficiency Rotator Nozzle
Radius: 6' to 12'
• Orange and Gray: 90° to 210°
• Lime Green and Gray: 360°
Bold = Optimal pressure for the MP Rotator is 40 PSI. This can easily be achieved by using the MP Rotator with the Hunter PRS40 Spray Body, pressure regulated at 40 PSI.
* Flow and precipitation rates may change as a result of reducing radius.