I-60

The I-60 is Ideal for Large-Area Turf Sites with Lower Pressures.

For all the municipal, sports, and commercial sites where low pressure persists, the I-60 is here. The I-60 was designed to provide low-pressure systems with long-range ability. This great innovation stops sites such as municipalities, city parks or community sports complexes from needing expensive pumps and large pipes required to boost pressure.

Product Tabs

Features

Model stainless riser: 4"
Standard factory installed nozzle: #13
Exclusive PRECISION DISTRIBUTION CONTROL™ nozzle mechanism
I-60-ADS Arc setting: 40–360 degrees
I-60-36S Arc setting: full-circle only
Nozzle choices: 6
Nozzle range: #7 to #20
Factory installed rubber cover
Through-the-top arc adjustment
Quick check arc mechanism
Water lubricated gear-drive
Warranty period: 5 years

Exclusive PRECISION DISTRIBUTION CONTROL™ Nozzle Mechanism [1]

Thanks to gear-driven pins that intermittently diffuse the stream, the exclusive PRECISION DISTRIBUTION CONTROL™ nozzle mechanism creates super efficient performance while doing so at very low operating pressures.

Color Coded Nozzles [2]

Nozzles are easier to differentiate in the field for quick reference and simple installation.

Optional Reclaimed Water ID [3]

Purple caps indicate where non-potable irrigation water is being used.

Stainless Steel Riser [4]

For unforgiving soil conditions, unpredictable climates, or heavy foot traffic, stainless steel is the best choice

Drain Check Valve (up to 10 ft. of elevation) [5]

The drain check valve keeps lines from draining when the system is shut off. This saves water, reduces liability, and increases system life.

Models

I-60 Model Chart

	I-60
Overall Height	8-3/8"
Pop-up Height	3"
Exposed Diameter	1-3/4"
Inlet Size	1" Female NPT

SPECIFICATION BUILDER

MODELS	STANDARD FEATURES	FEATURE OPTIONS
I-60 = 4" Pop-up	Stainless steel riser, check valve, and 6 nozzles	ADS = Adjustable arc 36S = Full circle

MODELS

STANDARD FEATURES

FEATURE OPTIONS

I-60 = 4" Pop-up

Stainless steel riser, check valve,
and 6 nozzles

ADS = Adjustable arc

36S = Full circle

EXAMPLES

I-60 - ADS	4" pop-up, adjustable arc
I-60 - 36S - 13	4" pop-up, full circle, and #13 nozzle

1" and 1.5" Inlet Rotors Comparison Chart

<< View 1/2" and 3/4" Inlet Rotors [6]

A Standard that Has Yet to be Matched Hunter made its reputation on the quality, reliability and innovative features found in its rotary sprinkler line and continues to set the benchmark by which other manufacturer’s rotors are judged.	[7]	[8]	[8]	[9]	[10]
	I-25 [7]	I-40 [8]	I-40-ON [8]	I-60 [9]	I-90 [10]
QUICK SPECS
Inlet Size	1"	1"	1"	1"	1½"
Radius	40' to 71'	44' to 69'	52' to 76'	50' to 67'	73' to 104'
Flow Rate (GPM)	3.8 to 31.5	7.6 to 29.5	13.0 to 33.7	6.5 to 20.8	29.5 to 83.8
FEATURES
Recommended Pressure Range (PSI)	40 to 100	40 to 100	40 to 100	40 to 60	80 to 120
Operating Pressure Range (PSI)	40 to 100	40 to 100	40 to 100	20 to 100	70 to 120
Precipitation Rate (in/hr)	0.4	0.4	0.4	0.4	0.75
Nozzle Trajectory	25 degrees	25 degrees	25 degrees	25 degrees	22.5 degrees
Check Valves	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed
Specialty Nozzles	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed
Check Height (ft.)	10	15	15	10	7
Nozzle Options	12	6	6	6	16
Warranty	5 Years	5 Years	5 Years	5 Years	5 Years
ADVANCED FEATURES
Low Angle Nozzle Choices
Automatic Arc Return
Non-Strippable Drive
Part and Full Circle in One Model
Reclaimed Water ID
Factory Installed Drain Check Valve	(10')	(15')	(15')	(10')	(7')
Stainless Steel Riser Option
Applications
Residential
Commercial/Municipalities
Athletic Fields
High Vandalism Areas
Low Pressure Areas
Reclaimed Water

Specifications

Operating Specifications

Radius: 50' to 67'
Flow rate: 6.5 to 20.8 GPM
Recommended pressure range: 40 to 60 PSI
Operating pressure range: 20 to 100 PSI
Precipitation rates: 0.4 in/hr approx.
Nozzle trajectory: 25 degrees

I-60 ADS Nozzle Performance Data

I-60 Nozzle Rack I-60 ADS Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
7 Orange	40	50	6.5	0.50	0.58
	50	52	7.1	0.51	0.58
	60	54	7.7	0.51	0.59
10 Lt. Green	40	53	8.5	0.58	0.67
	50	56	9.5	0.58	0.67
	60	58	10.2	0.58	0.67
13 Lt. Blue*	40	56	10.5	0.64	0.74
	50	58	12.1	0.69	0.80
	60	60	13.0	0.70	0.80
15 Gray	40	58	12.5	0.72	0.83
	50	60	13.9	0.74	0.86
	60	62	15.1	0.76	0.87
18 Red	40	59	15.6	0.86	1.00
	50	62	17.5	0.88	1.01
	60	65	18.6	0.85	0.98
20 Dk. Brown	40	62	17.5	0.88	1.01
	50	64	19.1	0.90	1.04
	60	66	20.4	0.90	1.04
* Factory-installed nozzle Note: Precipitation rates for ADS models are calculated for 180-degree operation. To calculate precipitation rate for 360-degree operation, divide by 2.

I-60 36S Nozzle Performance Data

I-60 Nozzle Rack I-60 36S Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
7 Orange	40	51	6.5	0.24	0.28
	50	54	7.5	0.25	0.29
	60	56	8.0	0.25	0.28
10 Lt. Green	40	53	8.5	0.29	0.34
	50	56	9.5	0.29	0.34
	60	58	10.2	0.29	0.34
13 Lt. Blue*	40	56	10.5	0.32	0.37
	50	58	12.4	0.35	0.41
	60	60	13.0	0.35	0.40
15 Gray	40	58	12.5	0.36	0.41
	50	60	14.0	0.37	0.43
	60	62	15.1	0.38	0.44
18 Red	40	59	15.6	0.43	0.50
	50	62	17.7	0.44	0.51
	60	65	18.9	0.43	0.50
20 Dk. Brown	40	62	17.5	0.44	0.51
	50	64	19.1	0.45	0.52
	60	67	20.8	0.45	0.51
* Factory-installed nozzle Note: Precipitation rates for the 36S model are calculated at 360 degrees.

I-60 DIMENSIONS CHART

	I-60
Overall Height	8-3/8"
Pop-up Height	3"
Exposed Diameter	1-3/4"
Inlet Size	1" Female NPT

Resources

Manuals

[11]

USA

[11]

[12]

I-60 Installation Card [11]

Photos

[13]

USA

[13]

[12]

I-60 Photos [13]

Specifications

[14]

USA

[14]

Metric

[15]

[12]

I-60 Installation Details - DWG [14]

[16]

USA

[16]

[12]

I-60 Installation Details - DXF [16]

[17]

USA

[17]

Metric

[18]

[12]

I-60 Installation Details - PDF [17]

[19]

USA

[19]

[12]

I-60 Written Specification [19]

Support

Topic	Title [20]	Rating [21]
Adjustment, FAQs	How do I obtain a Hunter adjustment wrench? >> Read More [22]	3.5
Adjustment	I-60 Rotary Sprinkler Adjustment Instructions >> Read More [23]	4
Adjustment, FAQs	How do I adjust the arc on my Hunter rotor? >> Read More [24]	2.35
Adjustment, FAQs, Video	How do I adjust the radius or distance of throw on my Hunter rotor? >> Read More [25]	4
Installation Procedures	Staking Kit and Reclaimed Water Identification >> Read More [26]	4.25
Adjustment, Educational	Hunter Rotor Pitot Gauge >> Read More [27]	2.75
	Where are the date code locations on my Hunter Golf Rotors? >> Read More [28]	3

I-60

I-60

The I-60 is Ideal for Large-Area Turf Sites with Lower Pressures.

Product Tabs

Exclusive PRECISION DISTRIBUTION CONTROL™ Nozzle Mechanism [1]

Color Coded Nozzles [2]

Optional Reclaimed Water ID [3]

Stainless Steel Riser [4]

Drain Check Valve (up to 10 ft. of elevation) [5]

I-60 Model Chart

SPECIFICATION BUILDER

EXAMPLES

1" and 1.5" Inlet Rotors Comparison Chart

I-60 ADS Nozzle Performance Data

I-60 ADS Nozzle Performance Data

7

10

13

15

18

20

I-60 36S Nozzle Performance Data

I-60 36S Nozzle Performance Data

7

10

13

15

18

20

I-60 DIMENSIONS CHART

Manuals

Photos

Specifications