I-35

Quick Specs

Application: Commercial/Municipal

Radius: 47' to 71'

Flow Rate: 7.7 to 31.5 GPM

Inlet Size: 1'' NPT

HomeownerProfessional

The I-35 is a 1" Rotor Packed With Built-In Features

When an irrigation project demands a 1" rotor that can do it all, the I-35 is the answer. Packed full of Hunter's legendary rotor innovations like a non-strippable drive, automatic arc adjustment, and part and full circle arc settings in one, this commercial-grade solution delivers maximum power and efficiency in the 47'-71' range. With simple adjustability, a diverse throw radius, and built-to-last commercial-grade construction, the I-35 puts system operators in complete control of large area challenges.

Product Tabs

Features

Models plastic: 6"
Models stainless riser: 6"
Arc setting: 50 to 360 degrees
Factory installed rubber cover
Through-the-top arc adjustment
Quick check arc mechanism
Water lubricated gear-drive
Nozzle choices: 12
Nozzle range: #9 to #30, #7LP to #15LP
Warranty period: 5 years

I-35 Model Chart

	I-35-06
Overall Height	10-3/8"
Pop-up Height	6"
Exposed Diameter	1-7/8"
Inlet Size	1" Female NPT

OPTIONS

FACTORY-INSTALLED
Nozzles: #9 to #30 Reclaimed water ID cover High speed rotation model (stainless steel only)

FACTORY-INSTALLED

Nozzles: #9 to #30

Reclaimed water ID cover

High speed rotation model (stainless steel only)

SPECIFICATION BUILDER (PLASTIC)

MODELS	STANDARD FEATURES	FEATURE OPTIONS	NOZZLE OPTIONS
I-36-06 = 6" Pop-up	Adjustable arc, plastic riser, check valve, and 8 nozzles	R, B	R = Reclaimed water ID B = BSP inlet threads	#9 to #30 = Factory installed nozzle number

MODELS

STANDARD FEATURES

FEATURE OPTIONS

NOZZLE OPTIONS

I-36-06 = 6" Pop-up

Adjustable arc, plastic riser, check valve, and 8 nozzles

R, B

R = Reclaimed water ID

B = BSP inlet threads

#9 to #30 = Factory installed nozzle number

SPECIFICATION BUILDER (STAINLESS STEEL)

MODELS	STANDARD FEATURES	FEATURE OPTIONS	NOZZLE OPTIONS
I-35-06-SS = 6" Pop-up	Adjustable arc, plastic riser, check valve, and 5 nozzles	R, HS, HS-R, B	R = Reclaimed water ID HS = High speed HS-R = High speed and reclaimed water ID B = BSP inlet threads	#9 to #30 = Factory installed nozzle number

MODELS

STANDARD FEATURES

FEATURE OPTIONS

NOZZLE OPTIONS

I-35-06-SS = 6" Pop-up

Adjustable arc, plastic riser, check valve, and 5 nozzles

R, HS, HS-R, B

R = Reclaimed water ID

HS = High speed

HS-R = High speed and reclaimed water ID

B = BSP inlet threads

#9 to #30 = Factory installed nozzle number

EXAMPLES

I-35-06	6" pop-up, adjustable arc
I-35-06-SS - R - 18	6" pop-up, adjustable arc, stainless steel riser, reclaimed water ID, and #18 nozzle
I-35-06-SS	6" pop-up, adjustable arc, stainless steel riser

Specifications

Operating Specifications

Radius: 47' to 71'
Flow Rate: 7.7 to 31.5 GPM
Recommended pressure range: 40 to 100 PSI
Operating pressure range: 40 to 100 PSI
Precipitation rates: 0.4 in/hr approx.
Nozzle trajectory: 25 degrees

I-35 Nozzle Performance Data

I-35 Nozzle Rack I-35 Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
9 Lt. Brown	40	47	7.7	0.67	0.77
	50	49	8.3	0.67	0.77
	60	50	9.2	0.71	0.82
	70	51	9.9	0.73	0.85
12 Lt. Blue	50	53	11.2	0.77	0.89
	60	54	12.3	0.81	0.94
	70	55	13.3	0.85	0.98
	80	55	14.3	0.91	1.05
15 Gray	50	56	13.4	0.82	0.95
	60	57	14.3	0.85	0.98
	70	57	15.2	0.90	1.04
	80	58	16.4	0.94	1.08
18 Red	50	58	14.5	0.83	0.96
	60	59	15.7	0.87	1.00
	70	62	16.9	0.85	0.98
	80	63	18.2	0.88	1.02
21 Dk. Brown	60	62	17.8	0.89	1.03
	70	63	19.2	0.93	1.08
	80	64	20.5	0.96	1.11
	90	65	21.8	0.99	1.15
24 Dk. Green	60	64	21.9	1.03	1.19
	70	65	23.6	1.08	1.24
	80	66	25.6	1.13	1.31
	90	67	27.0	1.16	1.34
27 Dk. Blue	60	66	23.5	1.04	1.20
	70	68	25.5	1.06	1.23
	80	69	28.0	1.13	1.31
	90	70	29.5	1.16	1.34
30 Black	70	68	26.9	1.12	1.29
	80	70	28.7	1.13	1.30
	90	71	30.6	1.17	1.35
	100	71	31.5	1.20	1.39

I-35 High-Speed Nozzle Performance Data

I-35 Nozzle Rack I-35 High-Speed Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
9 Lt. Brown	40	42	7.7	0.84	0.97
	50	43	8.3	0.86	1.00
	60	44	9.2	0.91	1.06
	70	45	9.9	0.94	1.09
12 Lt. Blue	50	48	11.2	0.94	1.08
	60	49	12.3	0.99	1.14
	70	51	13.3	0.98	1.14
	80	51	14.3	1.06	1.22
15 Gray	50	49	13.4	1.07	1.24
	60	51	14.3	1.06	1.22
	70	53	15.2	1.04	1.20
	80	54	16.4	1.08	1.25
18 Red	50	50	14.5	1.12	1.29
	60	53	15.7	1.08	1.24
	70	55	16.9	1.08	1.24
	80	57	18.2	1.08	1.25
21 Dk. Brown	60	53	17.8	1.22	1.41
	70	56	19.2	1.18	1.36
	80	58	20.5	1.17	1.35
	90	59	21.8	1.21	1.39
24 Dk. Green	60	56	21.9	1.34	1.55
	70	58	23.6	1.35	1.56
	80	60	25.6	1.37	1.58
	90	61	27.0	1.40	1.61
27 Dk. Blue	60	58	23.5	1.34	1.55
	70	62	25.5	1.28	1.47
	80	64	28.0	1.32	1.52
	90	66	29.5	1.30	1.51
30 Black	70	60	26.9	1.44	1.66
	80	62	28.7	1.44	1.66
	90	65	30.6	1.39	1.61
	100	67	31.5	1.35	1.56

I-35 Low Pressure Nozzle Performance Data

I-35 Low Pressure Nozzle Rack I-35 Low Pressure Nozzle Performance Data
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)	Precip in/hr
Nozzle	Pressure (PSI)	Radius (ft.)	Flow (GPM)
7LP Orange	40	45	7.5	0.71	0.82
	50	45	8.5	0.81	0.93
	60	46	9.5	0.86	1.00
10LP Lt. Green	40	50	10.1	0.78	0.90
	50	51	11.5	0.85	0.98
	60	53	12.8	0.88	1.01
13LP Lt. Blue	40	53	12.4	0.85	0.98
	50	54	14.0	0.92	1.07
	60	55	15.6	0.99	1.15
15LP Gray	40	55	14.7	0.94	1.08
	50	58	17.1	0.98	1.13
	60	60	18.5	0.99	1.14

I-35 DIMENSIONS CHART

	I-35-06
Overall Height	10-3/8"
Pop-up Height	6"
Exposed Diameter	1-7/8"
Inlet Size	1" Female NPT

Resources

Support

Topic	Title	Rating
Installation Procedures, Video	Rotor Nozzle Installation Procedure STEP ONESTEP TWOInsert the plastic end of the Hunter adjustment wrench into the lifting socket of the rotor and turn 90 degrees. Pulling up the riser will allow access to the ... >> Read More	5
FAQs, Troubleshooting, Video	What are some troubleshooting tips for a rotor that doesn't fully pop-up? Rotary sprinklers require a certain amount of pressure and flow to operate properly. If the rotor does not receive the pressure it needs to pop up a leaky head will result.Her... >> Read More	5
Adjustment, FAQs	How do I adjust the arc on my Hunter rotor? The easiest way to make adjustments on your Hunter rotor is to use a Hunter adjustment wrench. There are two adjustments that can be made on your rotor, the arc and the radius... >> Read More	5
Installation Procedures	Staking Kit and Reclaimed Water Identification Hunter makes an excellent assortment of accessory items that either connect to, or work in tandem with many of our products.Highlighted here are just a couple of those accesso... >> Read More	4.5
Adjustment, FAQs, Video	How do I adjust the radius on my Hunter rotor? The easiest way to make adjustments on your Hunter rotor is to use a Hunter adjustment wrench. This adjustment wrench is available through the Hunter online store.There are tw... >> Read More	4
FAQs	What is the purpose of the little hole that leaks water on the side of my rotor's stem? It's a combination drain hole and flush hole.It's a drain hole because we need to drain the water from below the nozzle turret so it doesn't push up on the nozzle turret in fr... >> Read More	4
Troubleshooting, Video	Why has my rotor stopped rotating? Hunter rotary sprinklers operate on a “gear drive” system. When in operation, water turns a small turbine in the base of the sprinkler, which drives a series of gears that cau... >> Read More	3.6
FAQs	Can I replace another brand's sprinkler with the Hunter brand? Yes, if you know the model of the existing manufacturer's sprinkler, you can use our Replacement Charts to find the appropriate Hunter pop-up or rotor that will have a similar... >> Read More	3.6
Adjustment, FAQs	How do I obtain a Hunter adjustment wrench? The Hunter adjustment wrench consists of a 3/32 allen key, two convenient finger loops for gripping and an opposite side arc adjustment key for all your Hunter rotor adjustmen... >> Read More	3.3
FAQs	What are the advantages of a stainless steel rotor over a plastic rotor? The stainless steel option on Hunter rotors offers mutliple benefits, here are a few:Vandal Resistance - Parks and other common ground areas that have heavy foot traffic can s... >> Read More	3

View All Support Articles for This Product

Rotors Comparison Chart (1")

	I-25	I-35	I-40	I-40 ON	I-60
FEATURES
Inlet Size	1"	1"	1"	1"	1"
Radius	37' - 71'	47' - 71'	45' - 70'	52' - 76'	50' - 67'
Flow Rate (GPM)	3.8 - 31.5	7.7 - 31.5	7.0 - 28.2	13.0 - 33.7	6.5 - 20.8
Recommended Pressure Range (PSI)	40 - 100	40 - 100	40 - 100	40 - 100	40 - 60
Operating Pressure Range (PSI)	40 - 100	40 - 100	40 - 100	40 - 100	20 - 100
Precipitation Rate (in/hr)	0.4	0.4	0.4	0.4	0.4
Nozzle Trajectory	25º	25º	25º	25º	25º
Check Valves	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed
Specialty Nozzles	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed	Pre-Installed
Check Height	10 ft	10 ft	15 ft	15 ft	10 ft
Nozzle Options	12	12	6	5	6
Warranty	5 Years	5 Years	5 Years	5 Years	5 Years
ADVANCED FEATURES
Automatic Arc Return
Non-Strippable Drive
Part and Full Cirlce in One Model
Headed & Slotted Set Screw
Recalimed Water ID
Available Low Pressure Nozzles
FloStop Control
Available Stainless Steel Riser
Applications
Commercial/Municipal
Athletic Fields
High Vandalism Areas
Low Pressure Areas
Reclaimed Water

Search form

I-35

Quick Specs

The I-35 is a 1" Rotor Packed With Built-In Features

Product Tabs

I-35 Model Chart

OPTIONS

SPECIFICATION BUILDER (PLASTIC)

SPECIFICATION BUILDER (STAINLESS STEEL)

EXAMPLES

I-35 Nozzle Performance Data

I-35 Nozzle Performance Data

9

12

15

18

21

24

27

30

I-35 High-Speed Nozzle Performance Data

I-35 High-Speed Nozzle Performance Data

9

12

15

18

21

24

27

30

I-35 Low Pressure Nozzle Performance Data

I-35 Low Pressure Nozzle Performance Data

7LP

10LP

13LP

15LP

I-35 DIMENSIONS CHART

Literature

Manuals

Specifications

Video

Rotors Comparison Chart (1")

I-35 High-Speed
Nozzle Performance Data

I-35 Low Pressure
Nozzle Performance Data