Hunter Technical Support Document

Share

Node Resetting Controller

Topics: 
Installation Procedures

Resetting the controller will erase the current program data and restart the controller. A reset does not, however, delete a program saved to permanent memory using the Easy Retrieve Memory feature to save a preferred program.

  1. From the Idle Mode, press and hold the minus (-), right arrow (>), and  PRG keys.
  2. After two seconds the screen will go blank. Continue to hold the minus (-), right arrow (>), and  PRG keys.
  3. 12:00 will flash on the display. Release the keys.
  4. The controller may show a countdown from 10 to 1 on the display, and then 12:00 am will be shown flashing when the reset is complete. The controller can now be reprogrammed.

     
Rate this Article: 
No votes yet

Related Links