Hunter Technical Support Document


Pro-C Total Run Time Calculator

Installation Procedures

The Pro-C keeps a running total of each program’s station run times. This feature provides a quick way to determine how long each program will water.

  1. While in the RUN TIMES mode use the   button to advance to the highest station position.
  2. Press the   button once to review the total of all run times programmed.
  3. Use the PRG button to review additional programs.

Test Program

The Pro-C allows the user a simplified method for running a test program. This feature operates each station in numerical sequence, from the lowest to the highest. You can start with any station. This is a great feature to check the operation of your irrigation system.

To initiate the test program:

  1. Press and hold the PRG button. The station number will be flashing.
  2. Press the   or   button to scroll to the station you would like the test program to start with.  Use the j and k button to set a run time of up to 15 minutes. The run time needs to be entered only once.
  3. After a 2 second pause, the test program will begin.
Rate this Article: 
No votes yet

Related Links