Hunter Technical Support Document

Share

Resetting Pro-C® controllers

Topics: 
FAQs

Pro-C (newer models) (with Seasonal Adjust Dial Position)

  1. Turn the dial to the RUN Position
  2. Press and hold the    button.
  3. Press and release the RESET button on the back of the front panel.
  4. Wait until the display shows 12:00a.m.
  5. Release the  button.
  6. The display will show 12:00a.m.
  7. The controller may now be reprogrammed.

           Pro-C (older models) (with Manual All Station dial position)

 

  1. Turn the dial to the RUN position.
  2. Remove the 9V battery.
  3. Press and hold the   ,   and  program buttons simultaneously.
  4. Press and release the Reset button on the back of the front panel.
  5. Release all three buttons when you see 12:00a.m. on the display.
  6. The controller may now be reprogrammed.
 
Rate this Article: 
Average: 4.5 (2 votes)

Related Links