SRC controller does not display the current year

Topics: 

The firmware in the older SRC controllers does not go past 2011. The controller can be utilized well past 2011 by following some simple steps. You can choose the year that correlates with the current calendar year as far as Sunday through Monday.

For the controller to track the correct days of the week, select the corresponding year from the list below. The controller will then display the correct current day of week for the years to come.

Current Year Start-End Year Change
2016 1/1-2/28 2010
  3/1-12/31 2005
2017 all days are valid 2006
2018 all days are valid 2001
2019 all days are valid 2002
2020 1/1-2/28 2003
  3/1-12/31 2009
2021 all days are valid 2010
2022 all days are valid 2005
2023 all days are valid 2006
2024 all days are valid 1996
2025 all days are valid 1997
2026 all days are valid 1998
2027 all days are valid 1999
2028 all days are valid 2000
2029 all days are valid 2001
2030 all days are valid 2002
2031 all days are valid 2003
2032 all days are valid 2005
2033 all days are valid 2006
2034 all days are valid 2007
2035 all days are valid 2008
2036 all days are valid 2009
2037 all days are valid 2010

Setting the Year:

  1. Turn the dial to the “SET CURRENT DATE/TIME” position.
  2. The year will be flashing in the display. By depressing with the round button with the “+” or “-“, you will change the year displayed. (Please use the chart below to select the year to input in controller for corresponding year)
Rate this Article: 

S U P P O R T
M E N U