Hunter Technical Support Document

Share

X-Core Setting Watering Schedule

Topics: 
Installation Details
Setting Days Water

Step 1

Turn the dial to the WATER DAYS position.

Step 2

The display will show the last program selected (A, B, or C). You can switch to another program by pressing the  PRG button.

Step 3

The controller will display the seven days of the week (MO, TU, WE, TH, FR, SA, SU). Each day will have  icon or  icon above the day. The icon would represent an "on" water day, while icon would represent an “off” watering day.
 

Setting Event Days

Step 1

Turn the dial to the WATER DAYS position.

Step 2

Enter an interval watering schedule as described on Selecting Interval Watering.

Step 3

Press the arrow (>) button to scroll to the No Water Days at the bottom of the display. MO will be flashing. Use the arrow (>) button until the cursor is at the day of the week you wish to set as a No Water Day.

Step 4

Press the minus (-) button to set this day as a no water day. The icon will illuminate over this day. Repeat steps 4 and 5 until all desired event day(s) are off.

Selecting Odd or Even Days to Water

With this option you can select interval watering from 1 to 31 days.

Step 1

With the cursor on EVEN, press the arrow (>) button once and the icon will appear and a 1 flashing in the display. Interval watering schedule appears on the display.

Step 2

Press the the plus (+) or minor (-) button to select the number of days between watering days (from 1 to 31 days). This is called the interval.

The controller will water the selected program at the next start time and will then water at the interval programmed.

Selecting Interval Watering

This feature uses numbered day(s) of the month for watering instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days: 2nd, 4th, 6th, etc.).
NOTE: The 31st of any month and February 29th are always “off” days if Odd watering is selected.

Step 1

With the cursor on SU press the arrow (>) button once. The icon and odd will be displayed. If odd day watering is desired, turn the dial back to the run position.

Step 2

If even day watering is desired, press arrow (>) button once. The icon and EVEN will be displayed. You can move back and forth from ODD to EVEN by pressing the arrow (<) and arrow (>) buttons.

Rate this Article: 
Average: 2.5 (2 votes)

Related Links