Support
MP Rotator Support

MP Rotator - Run Times

The MP Rotator has a lower precipitation rate than typical spray heads, so your run times may need to be lengthened compared to traditional spray heads. Your run times with the MP Rotator maybe two to three times longer than a standard spray zone. This is because the MP Rotator puts water down at a slower rate resulting in a significant reduction in the runoff, thus saving large amounts of water.

MP Rotator vs. Spray Nozzle at 40psi

Run Time Calculator

MP Rotator vs. Spray Nozzle at 40psi

Looking at performance data charts, you can see the difference in applicate rates for MP Rotator vs. Spray Nozzle at 40psi. Even with three times longer run time you are still using about 30% less water.

Precipitation Chart

Run Time Calculator

If you need additional help determining your run times, Hunter offers a Run Time Calculator. The calculator is a website that generates a peak-season run time schedule for each program and station in your system. The calculator factors in historical ET (evapotranspiration) data for your region and your irrigation system set up to determine the schedule.

It is important to remember the generated run-time schedule is based upon your area's hottest month. You will need to adjust water usage as temperatures cool and heat up. You can either do this manually, through your seasonal adjustment feature on your controller (select models only), or through a weather sensor, such as the Solar Sync.

Rate this Article: 
4.444445

Was this article helpful? نعم | No