Support
Wireless Valve System Support

WVS - System Off

The system off function will turn your WVC controller off, stopping all automatic watering until turned back on with your WVP.

To Turn the WVC off:
  1. Use the  button until the off  icon is displayed. After flashing for a few seconds, the word “OFF” will appear in the display.
  2. Squeeze the Transmit/Receive button on the WVP once to move to communication mode (lower part of LCD), use the  and   buttons to make sure the arrow is pointed toward the WVC icon, then squeeze and hold the Transmit/Receive button on the WVP. The WVP will beep twice indicating that the “OFF” command is being sent to the WVC. It will beep twice again indicating the command was successfully received by the WVC.
To Turn the WVC On:
  1. While in the programming mode (upper part of the LCD), press the  button until the current time and day is displayed.
  2. Squeeze the Transmit/Receive button once  to  move to communication mode (lower part of LCD), use the  and   buttons to make sure the arrow is pointed toward the WVC, then squeeze and hold the Transmit/ Receive button on the WVP. The WVP will beep twice indicating that the “ON” command has been sent to the WVC. It will beep twice again indicating the command was successfully received by the WVC.

Tip: Use the retrieve program function (see page 14) to identify if WVC has been turned off in the field. After retrieving the program, a controller that has been turned off will display the system off  icon on the WVP display.

Rate this Article: 
0

Was this article helpful? نعم | No