Valve Installation: Proper use of Fittings and Wire Splices
This video shows you the steps needed to prepare and install Hunter valves. You will learn how to prepare fittings and how to splice wires.
Programming Odd & Even Days and Programming Interval Watering
This video will teach you how to program your controller to water every other day by selecting odd or even days of the week to water. You will also
NODE: Setting up a separate program
To set up a separate program on your Node battery powered sprinkler timer, use the center button to go to the start time option and hit the program
NODE: Programming the NODE irrigation controller
In this video, you will learn how to program the Node battery powered irrigation controller. The Node controller requires the use of DC latching
Canceling Extra Start Times on Hunter Controller
An irrigation system that is repeating the cycle and continuously watering most likely has too many start times programmed into the controller. This
NODE: ضبط مدة الشغيل للمحطة
لتحديد أوقات الشغيل للمحطات على جهاز تحكم نود الذي يعمل بالبطارية ، استخدم الزر الأوسط للانتقال الى خيار مدة التشغيل للمحطة. استخدم زر الموجب لزيادة
NODE : ضبط بدايات التشغيل
برنامج الري هو مجموعة من المحطات مضبوطة لتروي في نفس الوقت. لعمل برنامج على جهاز التحكم نود الذي يعمل بالبطارية اضغط الزر الأوسط للدخول إلى خيار برمجة
NODE: Off mode
To put the Node battery powered sprinkler timer in the off mode, use the center button to advance to the off screen and allow the controller to go to
NODE: Seasonal adjustment
Another feature that the Node battery powered irrigation controller has is the seasonal adjustment option. To activate the seasonal adjustment, press
NODE : ضبط التاريخ والوقت
لبرمجة جهاز تحكم نود الذي يعمل بالبطارية يجب أولا ضبط التاريخ والوقت. لضبط التاريخ والوقت على نود اضغط الزر الأوسط ، انتقل الى الثواني من الخيارات
NODE: Setting days to water
To set the days that you want your sprinkler system to run using your Node battery powered irrigation controller, use the center button to scroll
NODE: Turn on stations manually
To run your sprinkler stations manually with the Node battery powered irrigation clock, hold down the right arrow to enter into the manual mode. Select
NODE : مقدمة ولمحة عامة عن الأزرار
تعرف على جهاز التحكم Node من هنتر. يتطلب جهاز التحكم ملف كهربائي من نوع تيار مباشر لاقط DC . لعمل برنامج على نود سنحتاح وقت بداية التشغيل، مدة التشغيل
Hunter Valves: Flow Control Adjustment
Learn how to adjust water flow directly at the valve using the Flow Control adjustment feature. You can increase or decrease the flow of water for
Controllers - Programming Multiple Programs Part 1 of 4: Introduction, Time/Date (ar)
Troubleshooting a Hunter Valve that is not Opening - Quick Tip (ar)
Controllers - Programming Multiple Programs Part 4 of 4: Other Modes (ar)
Controllers - Programming Multiple Programs Part 3 of 4: Program B (ar)
How to Reset a Hunter Controller (ar)
Canceling a Delay on a Hunter Controller (ar)
Manual Operation with a Hunter Controller (ar)
Display Troubleshooting on a Hunter Controller (ar)
Controllers - Programming Multiple Programs Part 2 of 4: Program A (ar)
Cleaning the Diaphragm on a Hunter Valve Quick Tip, تنظيف الغشاء في محبس هنتر
