X-Core Support

X-Core - Manually Run a Single Station

Step 1

Turn dial to MANUAL – ONE STATION position.

Step 2

Station run time will flash in the display. Use the arrow (>) button to move to the desired station. You may use the plus (+) or minus (-) button to select the amount of time for a station to water.

Step 3

Turn the dial clockwise to the RUN position to run the station (only the designated station will water, then the controller will return to automatic mode with no change to the previously set program). Also see One Touch Manual Start and Advance.

Rate this Article: 

Was this article helpful? Ja | No