Support
ACC2 Support

ACC2 - Program Water Days

ACC2

Setting the WATER DAYS will complete a basic automatic program. 

Mode Options:

  • Day of Week: Check the boxes for the days the program should water.
  • Odd/Even: Water only on odd or even calendar dates to comply with water restrictions. An optional check box allows skipping the 31st day of the month.
  • Interval: Water every x number of days, regardless of the day of the week. Enter the desired interval days.
  • Manual: This is designed for programs that are used for manual purposes only (e.g., winterization, test program, etc.).

NOTE: Odd/Even and Interval also have Non-Water Days, which can set a day (e.g., mow day) on which watering will never occur, regardless of the schedule.

Step 1

Select the lower right soft key to view the MAIN MENU.

Step 2

Press the scroll wheel to select. Turn the scroll wheel to the right to view the WATER DAYS menu. Press the scroll wheel to select.

Step 3

Press the scroll wheel to select. Turn the scroll wheel to the right to select the correct PROGRAM. Press the scroll wheel to select.

Step 4

Turn the scroll wheel to the right to highlight MODE. Select from the four options; DAY OF WEEK, ODD/EVEN, INTERVAL DAYS, or MANUAL. Press the scroll wheel to select.

Step 5

Turn the scroll wheel to the right to highlight ALLOWED DAYS TO WATER. Check the boxes for the days the program should water. Select the soft key to edit the next program or HOME to exit.

Rate this Article: 
0

Was this article helpful? Ja | No

Support Menu

S U P P O R T
M E N U