Support
Flow-Sync / Flow-Clik Support

Flow-Clik - System Status Indicator

The Flow-Clik Interface Box has a System Status indicator LED that provides information on the current status of the Flow-Clik system.
 
  • RED indicates an unacceptable amount of water was flowing and the system has been shut down. (Water flow exceeded the calibrated maximum for a time period longer than the startup delay).
  • GREEN indicates power is applied to the sensor, but no flow is occurring
  • FLASHING GREEN indicates an acceptable amount of water is flowing (below the flow sensor calibrated maximum)
  • FLASHING RED indicates that overflow is occurring (Water flow in excess of the calibrated maximum)
  • YELLOW indicates that the Flow-Clik is calibrating the sensor to the system flow.

 

Rate this Article: 
0

Was this article helpful? Ja | No