Support
X2 Support

X2 - Hide Programs

Tabs

ARTIKEL LESEN

The X2 is factory configured with 3 independent programs (A, B, C with four start times each) for different plant type requirements. The X2 can be customized to display only the required programs. You can hide those programs that are not required to ease programming.

ADVANCED MODE = (3 programs/4 start times)

LIMITED MODE = (1 program/1 start time)

SCHRITT 1

Hold the – MINUS button while you turn the dial to the Water Days position.

SCHRITT 2

Use +/– to change from 4 to 1 to hide extra programs.  The 1 will show only program A with a single 1 start time. 4 will show all programs and start times.

Rate this Article: 
0

Was this article helpful? Ja | Nein