Flow-Sync
Flow-Sync

Flow-Sync™

This cost-effective flow sensor provides a simple solution for flow monitoring and management with Hunter commercial controllers.
Sensor Flow

Models

Model Description Add to List
HFS Flow-Sync Sensor, use with ACC2, ICC2, and legacy ACC and I-Core Controllers; requires FCT fitting for pipe installation +
Showing 1 - 1 of 1

Choose: user-installed options

Model Description Add to List
FCT-100

FCT tee fitting for Flow-Sync Sensor, Schedule 40, 1" (25 mm) slip x slip

 +
FCT-150

FCT tee fitting for Flow-Sync Sensor, Schedule 40, 1½" (40 mm) slip x slip

 +
FCT-158

FCT tee fitting for Flow-Sync Sensor, Schedule 80, 1½" (40 mm) slip x slip

 +
FCT-200

FCT tee fitting for Flow-Sync Sensor, Schedule 40, 2" (50 mm) slip x slip

 +
FCT-208

FCT tee fitting for Flow-Sync Sensor, Schedule 80, 2" (50 mm) slip x slip

 +
FCT-300

FCT tee fitting for Flow-Sync Sensor, Schedule 40, 8 cm slip x slip

 +
FCT-308

FCT tee fitting for Flow-Sync Sensor, Schedule 80, 8 cm slip x slip

 +
FCT-400

FCT tee fitting for Flow-Sync Sensor, Schedule 40, 10 cm slip x slip

 +
Flow-Sync™
Flow-Sync™
Flow-Sync™
User installed options

Contact your local distributor for product availability and ordering.

Specifications

Operating Specifications

  • Recommended pressure range: 1.5 to 15.0 bar; 150 to 1500 kPa
  • Pressure loss: < 0.009 bar; 0.9 kPa
  • Sensor wiring: 2 x direct burial, 0.75 mm2 or greater, colour-coded or marked for polarity, up to 300 m from controller
  • Warranty period: 5 years 

 Download Product Spec Sheet

Features

The Flow-Sync is a simple and economical solution for metering and reacting to actual flow conditions. A proven water saver, the HFS monitors system flow rates and totals, and provides automatic reaction to high or low flow conditions during irrigation. The HFS is designed for use on pipe sizes up to 10 cm. When installed in conjunction with a master valve, the HFS can be a key source in preventing water waste resulting from line breakage.

Key Benefits

Simple-insertion flow sensor for metering and reacting to real-time flow conditions
Provides station-level flow monitoring for reaction to high- or low-flow conditions, helping to protect against flood damage and erosion
Compatible with Hunter ACC2 and legacy ACC and I-Core™ Controllers, as well as ICD-SEN Sensor Decoders, for flexible installation in a variety of settings
Compatible with ICC2 Controllers via Centralus communication modules
Easy connection up to 300 m from controller or sensor decoder
Sensor is pre-calibrated for K-factor and Offset based on pipe size, allowing for quick setup and programming within the controller

Charts

Flow-Sync Flow Range
Flow-Sync Diameter  Operating range (l/min)
Minimum Suggested Maximum*
25 mm 7.6 64
40 mm 19 132
50 mm 37.8 208
80 mm 106 454
100 mm 129 738

Notes:
* Good design practice dictates the maximum flow not to exceed 1.5 m/sec. Suggested maximum flow is based upon Class 200 IPS plastic pipe

Documents

  • All
  • Manuals
  • Marketing
  • Specifications
  • CAD Details
  • Replacement Parts
Show all documents

Media

VIDEOS

Choose A Topic

  • All
  • Product Guide
  • Field Knowledge
  • Specialty
  • Webinars
I-Core Controller HFS Flow Sensor Set-up

In part three HFS Hunter Flow Sensor set-up, Mike will go through installing a HFS flow sensor and setting up stations to be monitored, change overfl

All Product Videos

Studio Photos

Image
File:
h2495_path_fixed_clipped_rt.jpg
Classification:
Studio
Product Line:
Sensors
Products:
Flow-Sync™
Keywords:
product
,
Flow-Clik
,
Flow-Sync
Image Page

Download Image

Medium Original
By clicking download, you agree to our terms and conditions.

Photo Usage Disclaimer

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: "Photo courtesy of Hunter Industries Incorporated." Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers' products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you must send a copy of your intended use to creative@hunterindustries.com. Hunter must approve the design prior to final production.

All images must be accompanied by the credit line "Photo courtesy of Hunter Industries Incorporated." The credit line must appear adjacent to the photo.

Close
Image
File:
h2494_0.jpg
Classification:
Studio
Product Line:
Sensors
Products:
Flow-Sync™
Keywords:
product
,
Flow-Clik
,
tees
,
Flow-Sync
Image Page

Download Image

Medium Original
By clicking download, you agree to our terms and conditions.

Photo Usage Disclaimer

Disclaimer: It is illegal to reproduce Hunter photographs or other copyrighted material without the express written permission of the company. When used and/or reproduced, photos must be accompanied by the credit line: "Photo courtesy of Hunter Industries Incorporated." Hunter photos may not be used in association with copy, logos, or other graphic elements that represent other manufacturers' products. If you are using Hunter photos to create any type of print or graphic piece or on a website, you must send a copy of your intended use to creative@hunterindustries.com. Hunter must approve the design prior to final production.

All images must be accompanied by the credit line "Photo courtesy of Hunter Industries Incorporated." The credit line must appear adjacent to the photo.

Close