EZDT - Programming an EZ-1 Decoder

To program an individual EZ-1 decoder, you must connect the red and blue wires from the decoder to the EZ-DT. NOTE: You can only program one decoder at a time.

  1. With the EZ-1 disconnected from the two-wire path, insert the red and blue wires from the decoder to the EZ-DT programming ports located under the top cover.

  2. From the HOME screen, select PROGRAM.

  3. Select STATION or P/MV if programming for a pump start relay or master valve. 

  4. If you selected the station option, choose the desired STATION NUMBER.

  5. Select ENTER. Successful programming of a decoder is confirmed with TWO BEEPS and a GREEN checkmark.

   

 

 

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support