ST Systems

Attaching the Rotor and the Quick Coupler Supply Line

After attaching the flexible hose, install the rotor to the manifold assembly.

  1. Apply Teflon™ tape or paste to the adapter’s threads.
  2. Thread the rotor to the adapter to provide a watertight seal.
  3. Connect the adapter to the manifold with a coupler and gasket for the Victaulic fittings.

After the rotor is attached, the quick coupler supply line can be installed to the manifold.

  1. Apply Teflon tape to the supply line threads.
  2. Install the supply line fitting to the manifold.

Rate this Article: 

Was this article helpful? Yes | No