Wireless Rain-Clik™ - Installation Instructions

Wiring to Hunter Controllers

  1. Remove the sensor jumper across the two SEN terminals in the controller.
  2. Attach the two yellow wires to the 24 VAC terminals.
  3. Attach the blue wire to one SEN terminal and the white wire to the other SEN or SEN COM terminal.

P2C Sensor Wiring

WirelessRainClik_Wiring_1

Wiring the Receiver to Other Controllers: Normally Closed Sensor Applications

  1. Attach the two yellow wires to the 24 VAC  terminals.
  2. Attach the blue and white wire to the sensor terminals (if available) or in-line with the valve common  wire.

Reference Illustration

  1. Common wire to all valves
  2. Used for normally open sensor applications

Normally Open Sensor Applications

A few controllers on the market require normally open rain sensors. To attach the receiver to this type of controller, attach the blue and orange wire to the sensor input.

Controllers with 24 VAC Solenoids and a  Booster Pump

  1. Locate the common wire to the solenoid valves and the common wire to the pump relay. If these two wires are connected to the "common" terminal on the controller, disconnect both of them.
  2. Twist together these wires along with one of the wires from the Wireless Rain-Clik and secure with a wire nut.
  3. Attach the other wire from the Wireless  Rain-Clik receiver to the "common" terminal on the controller.

Reference Illustration

  1. Line-in
  2. Normally-open relay
  3. Line-out (to pump)
  4. Common wire to all valves
  5. Solenoid valves

Note: The pump circuit output must be 24 VAC. Do not proceed if 115 VAC.

SRC Controller (Discontinued)

  1. Attach the two yellow wires to the AC terminals of the SRC (polarity does not matter).
  2. Attach the blue wire to the RS terminal.
  3. Attach the white wire to the “C” terminal.
  4. Attach the valve common wire to the RS terminal.

Reference Illustration

  1. Common wire to all valves
  2. Used for normally open sensor applications. Hunter controllers use normally closed sensor wiring

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support