ACC2 - ID Wire

Wire and wire installation are key factors in successful decoder installations. Substitution of recommended wire and wire splices is at the installer’s own risk and is a major cause of start-up service troubles. Hunter provides two types of wire for use with decoder systems

ID1 WIRE: Two-conductor, solid-core, twisted, color-coded red and blue, direct burial PE jacket 14AWG/1.6 mm dia. copper wires. Suitable up to 5000 feet/1500 m.

ID2 WIRE: Two-conductor, solid-core, twisted, color-coded red and blue, direct burial PE jacket 12AWG/2.05 mm dia. copper wires. Suitable up to 7500 feet/2300 m.

  • Each two-wire output run of wire is called a "path".
  • It is not necessary to connect the paths to one another. Each path runs from the controller to the last decoder in the path, and simply stops there.
  • Never connect a wire path from one controller to the wire paths from another controller.

Hunter requires twisted wire meeting the listed specifications on all paths. The twist in the wire is an essential part of surge suppression. As lightning damage is never covered by warranty, it is in the installer’s best interest to share what Hunter has learned in nearly two decades of decoder installations, by using twisted wire that meets all the above specifications. Wire may be substituted provided it meets or exceeds these specifications. The red/blue coding is a convenience for matching the wires to Hunter decoders. Color coding the two different conductors is mandatory.

Decoder Design Guide

ID Wire Model Guide

2,500' Spools Standard Decoder Cables

ModelDescriptionSpecificationList Price
ID1GRYGray outer jacket14 AWG (2.08 mm2 ) solid-core twisted pair, 2,500' (760 m) per standard spool; use up to 10,000' (3 km)Call Dealer
ID1PURPurple outer jacketCall Dealer
ID1YLWYellow outer jacketCall Dealer
ID1ORGOrange outer jacketCall Dealer
ID1BLUBlue outer jacketCall Dealer
ID1TANTan outer jacketCall Dealer

2,500' Long-Range, Heavy Duty Decoder Cables

ModelDescriptionSpecificationList Price
ID2GRYGray outer jacket12 AWG (3.3 mm2 ) solid-core twisted pair, 2,500' (760 m) per standard spool; use up to 15,000' (4.5 km)Call Dealer
ID2PURPurple outer jacketCall Dealer
ID2YLWYellow outer jacketCall Dealer
ID2ORGOrange outer jacketCall Dealer
ID2BLUBlue outer jacketCall Dealer
ID2TANTan outer jacketCall Dealer

1,000' Spools Standard Decoder Cables

ModelDescriptionSpecificationList Price
ID1GRYFTGray outer jacket14 AWG (2.08 mm2 ) solid-core twisted pair, 1,000' (760 m) per standard spool; use up to 10,000' (3 km)Call Dealer
ID1PURFTPurple outer jacketCall Dealer
ID1YLWFTYellow outer jacketCall Dealer
ID1ORGFTOrange outer jacketCall Dealer
ID1BLUFTBlue outer jacketCall Dealer
ID1TANFTTan outer jacketCall Dealer

1,000' Long-Range, Heavy Duty Decoder Cables

ModelDescriptionSpecificationList Price
ID2GRYFTGray outer jacket12 AWG (3.3 mm2 ) solid-core twisted pair, 1,000' (760 m) per standard spool; use up to 15,000' (4.5 km)Call Dealer
ID2PURFTPurple outer jacketCall Dealer
ID2YLWFTYellow outer jacketCall Dealer
ID2ORGFTOrange outer jacketCall Dealer
ID2BLUFTBlue outer jacketCall Dealer
ID2TANFTTan outer jacketCall Dealer

 

Wire Connectors (DBRY-6)

All connections and splices in the red and blue two-wire path (IDWIRE) must be made with waterproof DBRY-6 or equivalent connectors. 

  • All Hunter decoders come with DBRY-6 connectors. 
  • All "-6" connectors are rated to 600 V direct burial and feature high-temperature resistance. 
  • Additional splices and connections in the two-wire path must be made with equivalent connectors. 

When a splice or connection is made, it's important to leave adequate slack in the wires. Leave 5' (1.5 m) slack to keep wire contraction from damaging connections and allow splice removal from the valve box for service or inspection. Wire slack may be coiled neatly or around the inside of the valve box.

Compatible Controllers

You may order Controllers in decoder versions as complete model numbers. Decoder and conventional output modules come in different configurations, so avoid installing them in the same controller at the same time.

ModelDescription
A2C-75D-M75-station base model, gray metal outdoor, wall mount
A2C-75D-P75-station base model, plastic outdoor, wall mount
A2C-75D-SS75-station base model, stainless steel, wall mount
A2C-75D-PP75-station base model, plastic pedestal
Earth Grounding

Earth grounding of decoder systems is another part of installation that requires planning and careful installation. Properly grounded decoder systems perform very well, even in regions with frequent lightning storms. Poor grounding often results in unnecessary equipment losses and irrigation downtime. 

Earth grounding rules for ACC2 Decoder Controllers are the same as for previous ACC/ICD Controllers. When retrofitting a new ACC2 Decoder Controller to an older ICD installation, there's no need to change grounding or field wiring if it was to specification originally. A large ground lug, or clamp, is provided in the controller to connect bare copper wire to earth grounding hardware.

Decoder installations also require earth grounding in the two-wire path itself to protect the decoder investment. Hunter ICD Decoders feature integrated surge suppression, and each is equipped with a bare copper wire for connecting to earth ground hardware.

 

2,500' SPOOLS STANDARD DECODER CABLES
MODEL LIST PRICE $ DESCRIPTION CARTON QTY
ID1GRY Call Jacketed decoder cable, gray, 14/2 1
ID1PUR Call Jacketed decoder cable, purple, 14/2 1
ID1YLW Call Jacketed decoder cable, yellow, 14/2 1
ID1ORG Call Jacketed decoder cable, orange, 14/2 1
ID1BLU Call Jacketed decoder cable, blue, 14/2 1
ID1TAN Call Jacketed decoder cable, tan, 14/2 1
2,500' LONG-RANGE, HEAVY-DUTY DECODER CABLES
MODEL LIST PRICE $ DESCRIPTION CARTON QTY
ID2GRY Call Jacketed decoder cable, gray, 12/2 1
ID2PUR Call Jacketed decoder cable, purple, 12/2 1
ID2YLW Call Jacketed decoder cable, yellow, 12/2 1
ID2ORG Call Jacketed decoder cable, orange, 12/2 1
ID2BLU Call Jacketed decoder cable, blue, 12/2 1
ID2TAN Call Jacketed decoder cable, tan, 12/2 1
1,000' SPOOLS STANDARD DECODER CABLES
MODEL LIST PRICE $ DESCRIPTION CARTON QTY
ID1GRYFT Call Jacketed decoder cable, gray, 14/2 1
ID1PURFT Call Jacketed decoder cable, purple, 14/2 1
ID1YLWFT Call Jacketed decoder cable, yellow, 14/2 1
ID1ORGFT Call Jacketed decoder cable, orange, 14/2 1
ID1BLUFT Call Jacketed decoder cable, blue, 14/2 1
ID1TANFT Call Jacketed decoder cable, tan, 14/2 1
1,000' LONG-RANGE, HEAVY-DUTY DECODER CABLES
MODEL LIST PRICE $ DESCRIPTION CARTON QTY
ID2GRYFT Call Jacketed decoder cable, gray, 12/2 1
ID2PURFT Call Jacketed decoder cable, purple, 12/2 1
ID2YLWFT Call Jacketed decoder cable, yellow, 12/2 1
ID2ORGFT Call Jacketed decoder cable, orange, 12/2 1
ID2BLUFT Call Jacketed decoder cable, blue, 12/2 1
ID2TANFT Call Jacketed decoder cable, tan, 12/2 1

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support