- Locking Lever: Down to lock module in place, up to remove module.
- C (Common Wire connection): Makes common connection for P/MV and/or station wiring.
- P/MV: Pump Master Valve connection: Up to 0.56 A for master valve or Pump Start Relay activation.
- SEN (x2) Sensor input: Standard inputs for Hunter normally-closed Clik™ sensors or Solar Sync® sensor.
- Test: 24VAC (always on): Used to test and locate valve wires.
- REM: Remote Control input: Pre-wired to Hunter SmartPort™ connector (plug on right side of wall mount).
- 24VAC (x2) Transformer connection: Connects 24V yellow wires from transformer.
- GND: Connects green safety ground wire from transformer.
- Ribbon Cable Connection: Connects controller to control panel.
- Installation tabs: Insert into module slot first, to tip and install module.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.