MP Rotator® Nozzle - Filters

With MP Rotator Nozzles, 80% of the filter can be plugged without a performance drop. MP Rotator Filters can be removed for cleaning and/or replacement. Please view the chart below for more details on each of the filter sizes.

MP ModelFilter P/NDescriptionScreen Size
MP-800SR-90MP8SCREENSPVery fine (grey)60 Mesh250 Micron
MP-800SR-360MPFSCREENSPFine (White)40 Mesh420 Micron
MP-815
MP-1000
MP-2000
MP Corner
MP Strips
MP-820MPCSCREENSPCoarse (Tan)20 Mesh840 Micron
MP-3000
MP-3500
MP-1000/2000-HTMPTFSCREENSPFine (White)40 Mesh420 Micron
MP-STRIP-HT
MP-CORNER-HT
MP-3000-HTMPTCSCREENSPCoarse (Tan)20 Mesh840 Micron
Filtration Guidelines

You should use primary filtration when operating with dirty water. A general rule is to use primary filtration that is five times the mesh rating of the nozzle filter. For example, if the nozzle filter is 20 mesh, the primary filter should be 100 mesh. Field testing has shown that the MP-800SR runs well in dirty water conditions with the use of a 120-mesh primary filtration system. Learn More

Reclaimed Wastewater

The MP Rotator Nozzle is an excellent choice when using reclaimed wastewater. The materials used in the MP Rotator are chemical-resistant polypropylene, polyurethane, acetal plastics, stainless steel, and EPDM rubber. These materials are designed to withstand the chemicals and conditions commonly used in wastewater irrigation.

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support