Installers

The CYCLE & SOAK feature allows you to split a station’s runtime into shorter watering periods. The shorter watering periods will help prevent runoff in situations like slopes or tight soils. It is recommended that the CYCLE time is less than the station’s watering time, and the SOAK time for the water to be absorbed. The total number of cycles is determined by taking the total programmed station run time and dividing it by the CYCLE time (e.g., see chart below).

USA

About this event

Riego Residencial en 10 Pasos

Webinar: https://event.on24.com/wcc/r/3593379/4FFC5DE1D0B7EA529C2782CDBCC8EAAB

  • 15:00 PM- 16:00 P.M. - Mexico
  • 18:00 - 19:00 P.M. - Chile
  • 18:00 - 19:00 P.M. - Buenos Aires/Montevideo
  • 18:00 - 19:00 P.M. - Uruguay

About this event

Irrigação Residencial em 10 passos.

Webinar: https://event.on24.com/wcc/r/3601513/7923B19116CFE4FADCC068E610425648.

Dial to the Devices menu, and select Clik Sensors for basic Hunter "Clik" sensors.

To set up a sensor, click the box for Enable Sensor.

The ACC2 sensor inputs are already configured as Normally Closed, but this can be changed for other types of contact closure sensor inputs to Normally Open.

It is also possible to enter a name for individual sensors.

USA

After connecting a Solar Sync sensor to the controller, set up operation in the Devices, Solar Sync menu.

USA

After connecting one or more flow sensors to the controller, set up operation in the Devices, Flow Sensors menu.

Select the sensor input number to be setup (1-6). The controller has 3 Flow Sensor inputs built in, but 3 more can be added with the A2C-F3 Flow Expansion module.

Check the box for either “Hunter” or “Other” flow meters.

USA

About this event

Controladores Wi-Fi Hydrawise

Webinar: https://event.on24.com/wcc/r/3561278/69088A3CFCE36558EF89612BA6EC8265

This section provides troubleshooting tips and answers to frequently asked questions that will be helpful when using the ICC2 and ACC2 Controllers with the Centralus Irrigation Management Platform.

Why are we receiving a SERIAL NUMBER IN USE message?

What are my PRICING OPTIONS when using the A2C-LTE Module?

How do I SHARE my controller with a customer?

USA

About this event

Controladores Padrão

Webinar: https://event.on24.com/wcc/r/3513718/D01C3FD10FE6BEA751B393105F4B73B6

About this event

Telhados e Paredes Verdes

Webinar: https://event.on24.com/wcc/r/3517864/4932208030F2670EEFDE1317CB3CE958

Pages